China 100km Radio Detection Cable Fault Tester Cable Fault Locator Distance Test Equipment

Product name: PCLC-901D Cable Fault Detection Instruments Test Equipment Tester cable fault locator
INTRODUCTION

The PCLC-901D Power Cable Fault Pre-locator is an easy operation device used for distance locating .It can test a variety of 35KV under different voltage grade, different sections, different media and all kinds of material of power cable faults, including: communication cables, coaxial cable and metal aerial cables,open circuit, short circuit, low resistance, high resistance, high resistance leak flashover fault.
It's easy to operate,support both touch screen/button operation and with friendly interface.

PCLC-901D can be used alone under the low voltage impulse mode.

Under the mode of impulse current,PCLC-901D needs to work with HVSG-500GX high voltage generator items.Under the multiple impulse mode,PCLC-901D also need PCLC-900C coupler.After distance locating,user could use PCLD-901P items for fault pinpointing. And these products can

be combined into a set of high performance and innovative cable fault testing system.

FUNCTION FEATHER:

Multiple distance locating method:

-Low current impulse method: apply to the locating of the low resistance fault. Short circuit fault, open circuit fault. It also can be used in the

measurement of the cable length, the intermediate joints, T joints, and cable termination joint. This method also can be used to correct the

wave velocity.

-Impulse current method: apply to the high resistance fault, breakdown fault. Use the current coupler to gather signal from the earth wire

-Multiple impulse method: improvement of the SIM method

200MHz real-time sampling

-Advance tech.Upgrading for SIM method

-Max. 0.4m measurement resolution,PCLC-901D has small blind zone and is special for the short cable and nearly-terminal fault cable

Touch screen and press key operation

-Touch operating screen with smart gesture operation

-Support cursor drag-drop function and double-click function,easy to locate

-Simple function menus with high performance.

Big color LED screen, friendly interface

-Simple function menus with high performance

7" LED screen,160°viewing angle,bright with 750cd/m2 to view under sunshine

-PIP copy(pic. temporary storage). There'll be a main window and three temporary storage windows could check three waveform together.

Waveform storage and PC communication

-Special software management for software upgrade, backup and restore in device.

-Waveform storage and communication with computer.

-Internal storage of waveform.

-Optional mini printer for waveform printing

-Support connection with PC or laptop

Power management

-Back light weakens if no operation in 2 min and power off in 10 min. if no operation.

-Built-in Polymer Lithium-ion battery.

-Working time could reach 7 hours for each use.

SPECIFICATION:

Locating methods: Low voltage impulse method Impulse current method Multiple impulse method

Sampling frequency: 200MHz

Gain range: 0-70dB

Low voltage impulse voltage: 32V

Max.resolution: 0.4m

Locating range: 100km

Dead zone: 2m

Battery: L-ion battery rechargeable batteries,7.4 V

endurance time over 7 hours

Communication interface: USB,bluetooth (optional)

Power supply: Input AC220V,50Hz,current 1A,charge for 6 hours

Dim.: 274x218x81mm

Weight: 3.5kgs

Operating Temperature: -10ºC-40ºC

Humidity: 5-90%RH

Elevation: <4500m

PHYSICAL CHARACTERISTICS AND OPERATION

ConFIGURATION Standard : main unit, low voltage impulse testing guideline, impulse testing connecting wire and filter,charger and so on.
MAIN UNIT PANEL shows the operation interface

Details:
LED screen : Display all the information. Will introduce in the following.
Signal port: connect with testing wire. Choose different wires under different testing mode.
Charging port:connect with wire for built-in battery
USB disk:save or import waveform
Multiple function button:total five functions,up,down,left,right and enter.Up and down button is used for gain adjustment,left and right button is used for cursor adjustment, and enter is used to switch the dotted cursor and soiled cursor
Power indicator light:it will light when power on
Power/Menu : Turn on or off the machine.When power on,it's menu button.Short press into the menu,press again to exit.
Test button:Press to test.

Company introduction
Along with the low-voltage pulse reflectometry, our systems implement advanced high-voltage pre-location technologies that allow to determine the distance to faults of various types with a minimal harmful effect on the cable lines.High level of safety during the testing with our cable test vans and mobile systems is ensured by built-in protection against overcurrent, overvoltage and overheating, as well as by the use of a continuous grounding monitoring, vehicle door closure sensors and self-health check monitoring.
High speed sample system and high bandwidth input circuit are integrated in the tester to get the exact reflection curve of signal so that the distance of fault point to signal sample point can be calculated in high accuracy and high resolution Special sound location tester configuration can be applied to locate the fault point more exactly.
The cable fault tester is suitable for measuring power cables, high-frequency coaxial cables, local telephone cables, street lamp cables, low-resistance of short-circuit, open-circuit disconnection faults, and various materials of various materials with different cross-sections and different media. Leakage and high resistance flashover faults. A powerful cable management system that automatically generates test reports.
It can test a variety of 35KV under different voltage grade, different sections, different media and all kinds of material of power cable faults, including: open circuit, short circuit, low resistance, high resistance, high resistance leak flashover fault.
It can be any cable length measurement of radio wave propagation in the known speed.It can test the power cables buried path and buried depth.route tracing evaluation of electric lines and cables.

1.certification
We have passed ISO9001:2015,CE,SGS approval and IEC report
2.Company profile
Tianjin Grewin is concentrating on transformers for 20 Years and complianted by ISO9001:2015,CB,IEC CB,CE etc.We're always pay great attention to its business philosophy "Quality and Honesty First".Grewin is specialized in the design and manufacture of wound components such as transformer,current sensors, chokes etc .windely used in communications,electronics,meters,industrial control,medical equipments and other fields.We are also a provider of power meters and instruments locators. 85% of its products exported to America, Europe, and Asia etc.We sincerely invite you to join us to create a bright future.

3.Terms of Shipment:
Within 10 working days after received related prepayment or L/C.
4.Payment terms:
(1)T/T 100% or 50% deposit by T/T in advance, balance amount to be paid 7 days before
delivery.
(2) By irrevocable L/C at sight, to be issued immediately against confirmed order.
(3)Payment by T/T, if order amount is less than USD 20,000.
5.Warranty:
(1)We provide 1 year warranty.
(2)If the product is defective, please notify us within 3 days of delivery.
(3)All products must be returned on their original condition, in order to qualify for a refund or exchange of goods
6.Why choose us?
Quality and honest first!
A. Flexible service for diffierent transformers with high efficiency performance.
B. Over 40 years experience of transformer designing and producing.
C.100% test of every single product we produce from incoming material checking.
D. UL, CE, ISO9001:2008
E. We offer custom-made transformers, OEM and ODM are welcome
F. We deliver the quality you expect at consistently competitive prices
G.Transformer quality lifetime:10 Years.
H.Specialty Sales service:5 -10 Years
7.Flow chart of trading activities:

NO
Step
Days need
1
Request for quotation
1 day
2
Making quotations
1 day
3
Offer and counter offer
3 days
4
Sending and receiving samples
3-10 days
5
Sample /confirm/iation
3 days
6
Placing a firm order
1 day
7
Paying and receiving the down payment
1-4 day
8
Factory production & Quality inspection
15-20 days
9
Paying and receiving the balance
4 days
10
Delivery of goods
1 days

8.contact
Tianjin Grewin Technology Co.,Ltd.

Web:www.grewin-tech.com
Address: 2# MeiNian Plaza No.16 DongTing Road,Hexi Distr,300222,Tianjin China.