10kN 50kN 100kN 300kN Double Column Digital Display Electronic Spring Tension and Compression Testing Equipment
PHONE: +86-15866777590
Application:
Adopting electric load reduction system after deceleration to driven precision ball screw assembly loading to achieve a fully digital adjustment data acquisition and control process It is made based on the national spring tensile and compression tester standards of technical requirement, professional design of automatic control and data acquisition system, realized the data acquisition and control process full digital adjustment. Mainly used to tension spring,compression spring, saucer reed,tower spring,leaf spring,clip spring,flat spring,composite spring,gas spring, mold spring, deformed spring and other precision spring tensile, compression, displacement and rigidity test and analysis.
Main specification:
ModelTLS- 10TLS- 20TLS-
30TLS-
50TLS-
100TLS-
200TLS-
300Max test force(N)10kN20kN30kN50kN100kN200kN300kNStructureFour columns floor type(upper tensile, lower compression /
upper compression, lower tensile)Control methodSingle chip controlTest accuracy1 classTest force test arrange (F·S)2%~100%F·S(stepless)Test force value relative error≤±1%Displacement value relative error≤±1%Displacement resolution0.01mmDeformation value relative error≤±(50+0.15L)umSpeed adjust range1-300mm/min1-200mm/minSpeed relative error≤±1%Effective tensile space700600550Effective compression space700600550Pressure plate size400450550Pressure plate diameter110mmPower supplyAC220V±10%,50Hz
Main Features:
1. Automatic calibration: system can automatically realize the accuracy of the calibration value
2. Automatic stop: After the sample broken, the moving beam automatic stop.
3. Automatic display: Real-time display two kinds curves: spring testing force and height, test force and deformation
4. One point or multi-point test: can preset standard values, upper and lower deviation, automatically determine whether spring qualified, lower or higher than the standard value of the standard value;
5. Measurements can be segmented, and can be calculated each segment stiffness (elastic coefficient) K, and the average stiffness;
6. Automatic return: beam automatic return to initial position when testing finished.
7. Breakage judgment: sample after fracture,beam automatic stop moving
8. Limiting protection: Program control and Mechanical limiting protection.
9. Overload protection: When more than 3 ~ 5% of the rated load device automatically stop working
Company Information CE ISO certificates: