China 11kv 50Hz 60Hz Outdoor Pole Mounted Capacitor Bank with Arrester with Drop out Fuse

Sl. No.DescriptionUnit RequirementManufacturers Particulars General Information Reference standard 60871IEC60871 Operational Data Rated System VoltagekV1111 Maximum System VoltagekV12 12 Rated FrequencyHz5050 System neutral-Effectively earthEFFECTIVELY EARTH Capacitor Unit Name of the manufacturer-To be mentionedHEMG Address of manufacturer-To be mentionedNINGBO Country of origin-To be mentionedCHINA Country of manufacture-To be mentionedCHINA Year of manufacture of the devices to be supplied-not before 20182018 Type-Naturally cooled static type shunt Power CapacitorsNATURALLY COOLED STATIC TYPE SHUNT POWER CAPACITORS Model No.-To be mentioned Rated voltage of individual capacitorkV12 12 Design overvoltage withstand rating (Phase to Phase)kV13.8 13.8 Rated capacity of individual capacitorKVAR100 100 Maximum permissible capacity of individual capacitor at 13.8 kVKVARTo be mentioned121 Capacitance of individual capacitorFTo be mentioned7.9uF Capacity of each bank (Consisting of three individual units)KVAR300300 Rated current of individual capacitorAmpere15.74 15.74 Maximum current ratingAmpere1.3 time of rated current1.3 Minimum Basic Insulation Level
(Full wave 1.2 x 50 micro sec. wave)kV7575 Power frequency withstand voltage (wet, 60 sec.) of each capacitorkV28 28 Over voltage rating at Power frequency-1.15 times rated voltage continuously1.15 Switching voltage under Transient over voltage rating and conditionkV3.25 times rated voltage for 4000 transient/ year3.25 Switching current under Transient over voltage rating and conditionAmpere400 times rated current for 4000 transient/ year400 Built in Discharge Resistor -YesYES Value of the discharge resistorohmTo be mentioned10MOhm Maximum time required for capacitor-unit internal discharge devices alone (without the aid of external discharge paths) to discharge the capacitor per phase voltage from rated voltage to 50 V.minutes55 Maximum total losses per KVARW/ KVAR0.100.1 Type of electrode-Aluminium FoilALUMINIUM FOIL Dielectric -Polypropylene filmPOLYPROPYLENE FILM Impregnating medium
Type-non PCB, non toxic, biodegradableNON PCB,NON TOXIC BIOGEGRADABLE Installation-Outdoor, Pole mounted, on existing 11kV Overhead feeder.OUTDOOR ,POLE MOUNTED ON EXISTING 11KV OVERHEAD FEEDER Mode of connection-DeltaDELTA Weight of each capacitor unitkgto be mentioned30 Ingress Protection IP 66IP66 Overall dimensions of each capacitori.heightmmto be mentioned207ii.depthmmto be mentioned207iii.widthmmto be mentioned380 Protection-Fuse cut-out, Dropout type and Lightning arrester (LA)FUSE CUT-OUT ,DROPOUR TYPE AND LIGHTNING ARRESTER 3 years of minimum Warranty period YesYES Mounting On single pole (SPC or Steel Pole)ON SINGLE POLE Bushing Material-Polymer, glazedPOLYMER Creepage distancemm/kV5050 Rated currentAmpere2526 No. of Bushings for each capacitornos.22 Structure
(Complete in all respect for installation in existing SPC or Steel Pole) List of hardware item to be supplied for installation of each set ofi.Capacitor bank (Consisting of three individual capacitor units)-List down the name and quantity of necessary hardware materialYESii.Protection unit (3 nos. of DOFC and 3 nos. of LA)-List down the name and quantity of necessary hardware materialYES Connection Cable with Lugs Type-PVC insulated Copper cableYES Size-To be mentioned25mm2 Quantity for i.Connection between 11kV line and Each capacitor unit through DOFCmeter3
(i.e, 9 meter for each capacitor bank)YESii.Connection between each DOFC and each LAmeter0.5
(i.e, 1.5 meter for each capacitor bank)YES