China 120W Quadruple Output Switching Power Supply

Q-120WModel Q-120BQ-120DQ-120COutputDC voltageCH1: +5VCH2: +12VCH3: -5VCH4: -12VCH1: +5VCH2: +12VCH3: +24VCH4: -12VCH1: +5VCH2: +15VCH3: -5VCH4: -15VVoltage tolerance± 2%± 6%± 6%± 6%± 2%± 5%± 5%± 6%± 2%± 6%± 6%± 6%Rated current11A4A1A1A8A2A2A1A10A3.5A1A1ACurrent range2~11A0.5~4A0.2~1A0.2~1A2~8A0.5~2A0.2~2A0.2~1A2~10A0.5~3.5A0.2~1A0.2~1ARated power120W124W120WRipple& noise80mvp-p100mvp-p80mv100mvp-p80mvp-p100mvp-p150mv100mvp-p80mvp-p100mvp-p80mv100mvp-pDc voltage ADJ. rangeCH1: -9%~+10%InputVoltage range90~132VAC/180~264VAC(adjust by switch), 127~373VDCFrequency47~63HzAC current2.8A/115VAC, 1.6A/230VACEfficiency77%Inrush currentcold start current 30A/115VAC, 60A/230VACLeakage current< 3.5mA/240VACProtectionOverloadRated output power 110%~135% start over load protectionProtection type: hiccup mode, auto-recovery after fault condition is removedOvervoltageCH1: 115%~135%protection type: cutoff output, recovery after restart powerEnvironmentWorking temp. humidity-10º C~+60º C, 20%~90%RHStorage temp. humidity20º C~+85º C, 10%~95%RH non-condensingWithstand vibration10~500Hz, 2G 10min/1 cycle, period for 60 minutes, each axesSafetyWithstand voltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVACIsolated resistanceI/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDCFitstandardsSafety standardmeet UL1012EMC standardmeet EN55022, CLASSAOthersDimension199*110*50mm (L*W*H)Weight/packing0.88kg/24pcs/22kg/0.043m³ /1.2CUFTNote1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25º C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.