China 120kw DC Charger for Electric Car Charging Station with GB T

Goldpower integrated DC charger designed with dual gun, the maximum power is 120KWUsing high-performance ARM chip control, 7-inch true color LCD touch screen, easy to achieve man-machine information exchangeWith perfect protection function like: input over/under voltage protection, output over current protection, output over voltage protection, output short circuit protection, over temperature protection, battery anti-reverse protection, insulation detection protection, emergency stop protection.The charging rectifier module adopts full bridge soft switch technology, the efficiency up to 95% or more.Perfect AC side lightning protection design, to adapt to thunderstorm areas.Ultra-low radiation, safe and reliable. Pressure level, insulation class and EMC of the charger comply to relative requirements as per NB/T 33001-2010,and part of function designed as per "Typical design of EVSE"The design of dustproof and waterproof up to level IP54 to meet indoor and outdoor requirements.To prevent rain directly onto the equipment, the roof needs to be installed outdoor.

GPEV120-AA750-S2 charger consists of outdoor cabinet, HMI, power distribution unit, monitoring module and charging rectifier module. Specific matching module refers to following table:

Optional
ConfigurationRectifier moduleOptional numberDistribution
Monitoring systemRemark
configuration
GPR75020A
(15KW module)8pcsAC input:
3-phase 5wire,250A/3P MCCB;
Anti--thunder:3-phase C pole
DC output:
double gun output mode.
Single gun mode output maximum
output current is 200A(DC+,DC-)
while double gun each 100A
EV auxiliary power supply:
12V10A optional(A+,A-)Monitoring systemSee the module
specifications
for more detailed
information

AmbientParameterMin.Typ.Max.UnitRemarkOperating temp. range-202550°CCertificated within this rangeExtreme operating
temp. range-402555°C-40°C ~-20°can be loaded with start
,extended temperature:50 -55°C,
The module outputs linearly at 4% / ° CRelative humidity5 95%No condensation on the surfaceAltitude0 2000m

InputParameterMin.Typ.Max.UnitRemarkInput mode3-Phase, 5 Wire (3Ph+N+E)Note: the charger rectifier module without center lineNominal input voltage range323380437VacNominal voltage, certified within this voltage rangeInput operating voltage range295380437VacThe input voltage 315-265Vac is linearly reduced from 15KW to 5KW by 2% / VMax. input voltage 560VacThe module could not work but can't be damaged under this input voltageMax. input current 240ALow voltage full load ,each phaseMax. input power 166KWInput 323Vac,output full load.Soft start time
5 15SThe nominal input voltage range is energized to the power supply and the output voltage rises to the set value.Power factor
>0.98Rated input, full load output>0.97Rated input, half load outputInput current harmonic
THD<5%Rated input, full load outputTHD<10%Rated input, half load outputGrounding methodProtected ground to the power supply case

OutputParameterMin.Typ.Max.UnitRemarkRated output voltage750Vdc Rated output voltage range300 750VdcCertificated within this output voltage rangeRated output current
10 160ASingle gun charging mode5 80ADouble gun charging modeRated output power 120KWMax. power up to 150KWStabilized voltage precision-0.5 +0.5% Ripple effective value 1% Dynamic response time 200us Dynamic response overshoot-0.5 +0.5% Efficiency 96.4% Noise 65dB(A) Current-sharing-5 5%Tested when the output current more than 50%CoolingForced air cooling

MechanicalDimension(WxHxD) 750*700*1800 mmWeight≤250Kg(including module)

Communication protocolGB/T 18487.1-2015DC Charging Gun200A DC *2Function1.LAN/WLAN/4G communication
2. IC card/Apps/QR code payment
3. Cloud management