China 125kHz Em ID Access Control Reader Wieg26 Bits IP 65

Specification

Less than 0.2 second Response SpeedLess than 0.5 seconds Proximity Time Distance2-15cm Proximity RangeSupport EM-ID 125Khz card or keyfobBuilt-in AntennaBuilt-in LED (Double Color LED)Built-in Loud Speaker (Buzzer)DC 12V Working Voltage,70mA Working Current100 Meters Communication DistanceReal Time Data TransferBlack ColorPVC Case Material (Black Resin for Water-Proof Function)77.5mm*42.8mm*16.8mm

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red: 6-14V DC

Black: GND

Green: Wiegand D0

White: Wiegand D1

Grey: Green LED

Purple: Beeper

Packing list for RFID Reader

1* RFID reader

2* Screws

1* Outter box

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

Application
Certification
Access control card reader photo
Contact us