China 125kHz RFID Reader Access Control Systems Proximity Card Reader

WaCutter & Tongs terproof 125kHz Low Working Temperature Access Control RFID Card ReaderSpecification*Wiegand 26bits/ Wiegand34bits, RS232, RS485 interface.
*Less than 0.2 second Response Speed
*Less than 0.5 seconds Proximity Time Distance:
*5-10cm Proximity Range
*Support ID (125 kHz) or Mifare1 (13.56 MHz Frequency) Card
*-25 C to 75 C Ambient Temperature
*10%-90% Ambient Humidity
*Built-in Antenna
*Built-in LED (Double ColorEngineering & Construction Machinery LED)
*Built-in Loud Speaker (Buzzer)
*DC 5V-16V Working Voltage. Standard Direct Current 12V
*70mA Working Current
*100 Meters Communication Distance
*Real Time Data Transfer
*White or Black Color
*PVC Case Material (Black Resin for Water-ProofAnalysis Instrument Function)
*114*76*16(mm)NameCard Reader Access Control Keypad/non-keypadColorBlack /WhiteVoltageDC9~16VCurrent≤100mAAmbient Temperature-25°C~75°CReading Range5~15CMOutput FormatWiegand26/34,RS485/232Card TypeEM-ID/Mifare-ICComunMilitary Apparel ication DistanceWG≤100M,RS485≤1200MInstallationUsing + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.Wire ConnectionRed DCWire Mesh 5V-16V
Black GND
Blue D1
White D0
Brown BEEP
Green LED
Yellow AlarmNotice1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires