China 12V24ah Sealed Lead Acid Battery for Wind Power System

12V24ah Sealed Lead Acid Battery for Wind Power System
Description
Reactive polymer gel battery can be used for solar systems, wind power generation systems, uninterruptible power supply (UPS), inverter, EPS, street lamps and other products supporting the use
Features
Charge and discharge accept ability:
By using automatic safety valve, can prevent abnormal internal pressure caused by charging generate gas from damaging the battery
Full sealed battery under normal floating would be no electrolyte and acid fog
At the same time, the independent patent technology of battery tray with battery, ensure the battery be used more secure
Long service lifetime
Computer design the corrosion resistance of calcium, lead tin alloy plate gate, ABS corrosion resistant material shell, high seal reaction efficiency, so as to ensure the long service life of the battery.
Low self-discharge rate:
used special lead calcium alloy, strictly control the separator, electrolyte, and other working procedure impurities, under the environment 20 ºC, battery don't need adding electricity energy in 6 months and can be normal used
Strength conductive capability
Use copper silver plated terminals and special design, guarantee the excellent electrical properties
Strength ability to environment:
Can be used in -25 ºC ~+ 50 ºC ambient temperature, suitable for bad weather.
Strength direction:
High efficiency to sealed reaction. Either standing or lying, battery will not leak to ensure normal use
Green and pollution-free
mute and no pollutant discharge. Battery room doesn't need acid anticorrosion measures, it can be built in one room with electronic equipment and other equipments.
New active polymer gel battery series have longer service life and deep ciycle features
Adopt special slicker solder multivariate anode alloy, corrosion resistance stronger than traditional lead calcium alloy, cycle life is more superior. Optimize the grid distribution design, has the stronger output power
Unique lead paste formula and manufacturing process, adequately conducive to the formation of 4bs, make sure the battery has a longer floating service life
The rational use of additives,. Make the PCL (capacity early losses) to be better solution

Technical parameter of the 24AH Sealed lead acid batteryModel24AHOverall dimensions(L*W*H)166mm*126mm*175mmNet weight8.5KGPackageCartonVoltage12VInternal resistance of the batteryfully charged (25ºC)≤10mΩThe battery capacity under different temperature60ºC104%25ºC100%0ºC95%-50ºC86%Different hourly rate capacity10hr100%C1030hr110%C10Battery storage capacityone month(25ºC)95%three months(25ºC90%six months(25ºC)88%Biggest charging current2.5C10 (A)Limiting pressure of charging voltageCharging Voltage of equalized14.4V/12V-25mV/CCharging Voltage of floating13.5V/12V-20mV/C

Product Description
With the double MCUs,the product provides different charge voltages and charge management for batteries of different types.Its mains supply preferred mode,energy-saving mode and battery preferred mode are settable, thus making it easy to meet the different application needs of users.It has an LCD.it is widely applied to families, schools,streets,frontier defense,pasturing areas,industrial equipment,satellite communication equipment,military vehicle-borne equipment,ambulances,police cars,ships,etc.
Product Features

Excellent performance because of double-MCU intelligent design;Pure sine wave output for compatibility with loads of different types;Visualization of operation status of the equipment through a digital LCD;A wide range of input voltage,accurate output and full automatic voltage stabilization;Settable battery type and charge current for the charge management of betteries of different types;Settable mains supply preferred mode,energy-saving mode and battery preferred mode for easy meeting of the needs of different users;Overall protection functions(battery overvoltage protection,battery undervoltage protection,overload protection,short circuit protection and overtemperature protection).

Technology Parameter
Product Recommended
Company Information

Packaging & Shipping
FAQ
Q1: What is the warranty of your product?

A1: Quality warranty for 12 months; parts will be shipped free during warranty period.

Q2: Can you do OEM or ODM?

A2: Yes, we can offer the OEM or ODM service.

Q3: What is your delivery time?

A3: Within 5 day after receive advanced payment.

Q4: What minimum order do you require?

A4: 1 piece.

Q5: Why choose us?

A5: 1) prompt delivery and good after-sale services.

2) We have our own factory, the selling prices is competitive.

3) All of our products have CE certification, ISO9001:2008, RoHS.

4) 80% new materials for production and superior quality.

5) Professional engineer designers.

Q6: Quality Service?

A6: Any inquiry replied within 12 hours.
Any problem resolved within 24 hours.