China 14418 Stainless Forging Pelton Turbine Runner

Name: Hydro 1.4418 pelton stainless steel runner
We are professional Kaplan Tubular Water Hydro Power Generator Turbine Runner Hub Center factory from china
Forging/forged with CNC Machining
For High Water Head Hydropower Project
How it works:
A Pelton Water turbine is widely used in hydropower station with the heads from 80-1600m.
The Pelton wheel (Runner) is like a circular disk mounted on the rotating shaft . This circular disk has some buckets, placed at equal spacing around its circumference.
Nozzles are arranged around the wheel such that the water jet emerging from a nozzle is tangential to the circumference of the wheel.
Our pelton runner used high strength stainless steel material, Casted with machining or Forged with CNC machining, it has a good profile and high
efficiency.
Where to use:
1. Water head: from 80m to 1600m
2. Output Power: 500kw to 30MW
3. Machining type: casted+ manual abrading or integrally Forged + CNC
4. Diameter: from 500mm ~ 2500mm
If you are interest with the Pelton water turbine, you should send some key parameters (such as net water head, flow discharge, unit number, frequency, voltage) in your inquiry.
We can offer pelton turbine runner above 500KW, supply the runner with Forged and CNC machining, or runner with cast

Forged ratio:
no less than 4:1Technical data:
According to the customer's requirement of Chemical Composition,
Physical Properties and Mechanical Testing
Test:
Ultrasonic test according to SEP 1921-84 G3 C/cCertificate of Quality
in addition the normal terms, production process,
the mechanical property forged ratio, UT test result, Grain size,
heat treatment methods and the sample of is shown on the Certificate of QualityMarking:
Grade, heat NO. length will be stamped one each bar with required colorPayment:
30% advance by TT; Balance pay before the shipment against shipping documents
or irrevocable LC at sight

·
ISO 9001:2008, PED Certificate,API, TUVRheinland, Bureau Veritas (BV)
·

How to pack