China 155m 8 Port Poe Ethernet Switch

155M 8 Port POE Ethernet Switch(DF-155M-8P-E)
DF-155M-8P-F is specialized unmanaged POE switch designed for video surveillance and network project system, etc. It provides 8 x 100Mbps Ethernet ports and 1 x 100Mbps fiber optical port, support VLAN function, can effectively prevent whole system from broadcast storm so that make the data transfer more safe.
This POE network switch can meet customer's general demands. POE network switch with POE function, designed for high-definition network camera's internet access. It provides 8 100Mbps PoE Ethernet switches, complies with IEEE802.3af/at standards, and also simplifies wiring, avoids the troublesome of installing power socket for powered devices.
1.Features 1.1 Provide 8 x 100Mbps Ethernet ports, 1 x 100Mbps fiber optical port
1.2Support End-Span method, complies with IEEE802.3 af/at standards, can supply max 30W power which is possible to power high-power infrared cameras.
1.3 Comply with IEEE802.3, IEEE802.3u, IEEE802.3af/at standards.
1.4Support IEEE802.3x full-duplex flow control, support Auto MDI/MDIX
1.5Support port-base Vlan, prevent from broadcast storm so that make data conversion more efficient and safe.
1.6 Various LED display functions can real-timely display the device's current working conditions, and help prompt facility and remove trouble easily.
1.7Excellent lightning protection, lightning capacity up to 2KV
1.8 Easy to install and operate on walls or on the desktops2.Technical Specifications

ItemDescriptionModelDF-155M-8P-FPower SupplyPower Supply Mode Power AdaptorVoltage RangeDC 48~56VPower ConsumptionThe device <5W, POE power supply <120WNetwork Port ParameterNetwork Ports1~8 Ethernet Port:10/100Mbps
1 Uplink optical fiber port:SC/FC/ST Transmission Distance1~8 Ethernet Port:0~100m
Mandatory 10 Mbps reach up to 250m
Uplink optical fiber port:single mode fiber 20kmTransmission Media1~8 Ethernet Port:Cat5e/6 standard UTP cable, Uplink optical Port:optical fiberPOE AgreementIEEE802.3 af/at standardsPoE Power Supply ModeEnd-span methodPoE Power Supply WattageEach port≤30W,Whole device<120WNetwork Switch SpecificationNetwork StandardIEEE 802.3/802.3uSwap ModeStore-and- forwardData-Caching Mechanism1MMAC Address List2KStatus IndicatorsPower Indicator LightOne power light (Green)Optical Fiber Port Indicator One fiber link indication light ( green), Green light keeps on when the fiber port is well connected; Blinking when transceiver dataFE Uplink PortLED (Green): On, port is link on; Off, port is link down;PoE Indicator 8 PoE indicator light(yellow)PoE Network Port LED1~8 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver dataSwitch Vlan SwitchOn: CCTV Mode, support 250meter power and data
Off: normal mode, support 100meterProtection LevelSurge ImmunityLevel 3, executive standard:IEC61000-4-5Electrostatic Protection1a touch electric discharge: level 3 1a Air discharge: level 3 Executive standard:IEC61000-4-2Operating EnvironmentWorking Temperature0ºC~55ºCStorage Temperature-40ºC~70ºCHumidity(non-congeal)0~95%Mechanical AttributesDimensions (L*W*H)188.5mmx102.5mmx28.25mmColorBlackWeight612gReliabilityMean time between failures (MTBF)>50000h

Note:If any changes with product specification, forgive without prior notice.As transmission distance has certain relation with the cable, so you are suggested to use standard cat5e/6 cable for longest distance needed.
3.V-lan 3.1 Introduction
When V-lan function is opened, the LAN port can't make data conversion but can only communicate via uplink port. The V-LAN workstation is built separately between every network port and UP-link port.
In the same V-lan workstation, no matter which actual PoE switch being connected, the signal transmission are separately isolated from each other which seems they are on the different switches. The broadcast in the same V-lan can only be received by the members but can't be transmitted into other V-lan, which can greatly control unnecessary broadcast storm. What's more, different V-lan can't even communicate with each other when there is no routing, which increases the safe degree among different department in the enterprise.
3.2 Configuration
Toggle the V-lan button on the back of the switch to ON state, V-lan indicator lights, then press the reset button to restart the switch, in this way V-lan functions.
Note:
Please press reset button or repower the device when turn on V-lan, only in this way the switch can enter corresponding mode.
4.Troubleshooting When the device encountered with troubles, it can be solved by the methods below:
1) Make sure the device is installed correctly referring to the requirements;
2) Make sure RJ45 cable is good contacted without open circuit; the cable design complies with EIA/TIA568A or 568B international standards.
3) Each PoE port can provides max 30W to switch and the total power is less than the maximum power provided by the device. So please don't connect with the PoE device which is more than 30W.
4) Press reset button to check if the device can work properly.
5) Replace the trouble device with a normal working device to check if the device is damaged.
6) If all the above methods still don't work, please contact with manufacturer directly.
5.Product Overvview
6.Certificate
7.Exhibition
Our Services:

1.Order inquiry: Keep working time from 9AM to 23PM to gurantee the first reply to clients,and 24 hours no Cellphone power off

2.Order production: Keep very close touch with production department to gurantee the right delivery time to clients

3.Before shipment: Our sales would double check the order quantity,package and strength of cartons to avoid lost and damage

4.After shipment: Keep tracking shipping status and reporting to clients

5.Shipment: DHL,UPS,FEDEX,TNT,EMS,SEA,AIR etc.

If you interest or have any question, Why not send inquiry? Welcome & Just Do It !!!