China 18 Baskets Aluminum Profiles Double Door Type Aging Furnace Gas-Fired Heating Double Suction Heat Circulation Oven

Equipment configuration and technical parameters:
1. Equipment: 18 blanket material gas double-opening aging furnace, gas-fired heating, double-suction heat circulation air circulation, furnace door with airpipe. The air channel is automatically reversed and circulated to heat, which is conducive to the uniformity of the furnace temperature.
2. Furnace size: 13000 x 3200 x 2450mm (length x width x height)
3. Material blanket size: 6000 x 900 x 650mm (L x W x H)
4. Furnace size: 15000 x 3600 x 3700mm (length x width x height) (not including fan size)
(Note: furnace capacity: 3 * 3 * 2 = 18 frames)

The furnace is made of pre-shaped steel plates,and equipped with special designed air blower,with advan-tages of high pressure and high flow,to circulate the hot air inside furnace more evenly,so as to ensure the aluminium profile quality after aging.

Ceramic fiber sealing embed along the furnace door and the pneumatic cylinder that locks the door ensure the best sealing and short heating time,thus less energy consumption compared to regular model.
1.Circulating fan: the fan is installed on the upper part of the furnace body;
2. Furnace structure: the furnace body bracket is welded with channel steel, angle steel, rectangular welded pipe, etc., and the furnace wall sealing plate is δ2-Q235 plate;
3. Insulation: the thickness of the insulation layer on both sides and top of the furnace body is 200mm, the thickness of the insulation layer at the bottom of the furnace is 120, the thickness of the insulation layer of the furnace door is 160mm; the insulation material is made of high-quality aluminum silicate fiber cotton;
4. Furnace door: The thickness of the furnace door is 850mm, and the inside of the furnace door is equipped with a circulating air duct; the furnace door is dragged and lowered by the electric hoist, each furnace door is locked by the cylinder; the geared motor is the worm gear reduction motor.
5.Trolley: The furnace is equipped with two trolleys. The trolley is a channel steel frame structure. The lower part of the trolley is equipped with a plurality of rollers. Two roller bearings are mounted on each roller. The trolley is placed in and out of the furnace. Needle reducer and chain push log drag;
6. Heating method: Integrated burner for direct heating.