China 1X4 LED Office Lighting LED 1X4 Troffer Light Commercial Offices LED Troffer

25W LED 1x4 Troffer Light,LED 1x4 Troffer,LED 1x4 Troffer Retrofit Kit, 3250lm,75W HPS Equiv,available in 2,700K to 5,700K, Perfect for use in commercial applications such as offices, schools, retail locations, hospitals, and more.Easy-to-install upgrade to LED lighting in existing recessed troffers,replaces traditional fluorescent troffers.
STRUCTURE, MATERIALS, & FEATURES
1. Beam angle:120 degrees
2. Incandescent/ MH/HPS/HID/MHL/CFL lamp retrofit
3. Precision Die Cast Aluminum Housing
4. Durale Chip and Fade Resistant Powder Coat Finish
5. Energy saving up to 70%-80%
6. Wide colour availability in degrees Kelvin(K),2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW
7. 50,000 hours, 5 Years Warranty
8. Easy Installation
9. UL listed power Test Instrument supply, ISO CE ROHS listed
Additional InformationItem No.BB-RTGD-25W-A-14-DRated Watts25wInput Voltage100-277VAC/50-60HZ | 200-480VAC availableLuminous FluxCircuit Board 3250lmDriver ModelUL ListedPower Factor>0.95Beam Angle120°Light Source/CountSMD LEDColor Rendering Index (CRI)Ra > 80Operating Temperature-40 ~ 45LED Luminous Efficiency>130lm/wColor Temperature2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CWLED Emitter Life50,000 hours at 25°CFixtMedical Diagnosis Equipment ure MaterialPrecision Die Cast Aluminum HousingApplicationOffices, Lobbies, Hallways & Conference Rooms in Schools, Municipalities, Libraries, Airports, Healthcare Facilities, Showrooms, Corporate Campuses, Retailers and Hospitality Environments.The DimensionsL1213mm(47.76in) x W303mm(11.93in)
SENSOR MODULE
PIR sensor
Dimming Function:
1.on @ night light
2.off@day light
3.100% on when motion detected(in night).hold time 40"(typical).if no new
motion trigger.
Note:1sensor @ 1 lamp only.Dailight sensor
It supplies a simple and effective solution for daylight harvesting.Connecting to
1-10V interface and using photocell to measure ambient lux level and
automatically calculate how much artificial light is needed,and then convert the
amount of light to 1-10V dimmable control gears(ballasts or LED drivers).1-10V
dimmable control gears adjust the lighting output according to the signal from
the daylight sensor.
Note:1sensor @ 20 lamps MaxMicrowave motion available
1.As built-in daylight sensor can read brightness value,the sensor dose not
swith on the light if with sufficient natural light.
2.Switch on the light on detection of movement,and switch off after ahold time
when there is no motion detected.
Note:1sensor @ 10 lamps Max
PICTURES SHPharmaceutical Equipment & Machinery OW
- See more at: http://www.bbier.com/25W-LED-1x4-Troffer-Light-1297.html#sthash.fUm8xYeH.dpuf
PICTURES SHOW
PACKAGEINSTALLATION
Normally. The Traditional Tube Light has the ballast or capacitor or ignitor.
Replace Traditional TubeSound Module Light
1.Remove the Ballast,Capacitor,Ignitor.
2.only need to put the L(live wire),N(null line) connected to the external power supply.
APPLICATION