China 2.2kw 1pH Input 220V 3 Phase Output Frequency Converter

Specifications
220V 0.75KW mini frequency inverter
1,variable frequency drive 220v
2.Simple PLC,PID adjustment
3.High stablility
Compared with similar products, the mini size is smaller and more economical to install.

Product Specifications

ItemsS800EPower
SupplyRated voltage, Frequency
One-phase/Three-phase AC 220V 50/60HzVoltage Range
220V: 170~240VOutputVoltage Range220V: 0~220VFrequency Range0.10~400.00HzControl methodV/F control, Space vector control.IndicationOperating status/Alarm definition/interactive guidance: eg , frequency setting, the output frequency/ current, DC bus voltage, the temperature and so on.ControlSpeciAlationsOutput Frequency
Range0.10Hz~400.00HzFrequency Setting
ResolutionDigital input: 0.01Hz, analog input: 0.1% of
maximum output frequencyOutput Frequency
Accuracy0.01HzV/F ControlSetting V/F curve to satisfy various load
Requirements.Torque
ControlAuto increase: auto raise torque by loading
Condition; Manual increase: enable to set
0.0~20.0% of raising torque.Multifunctional
Input TerminalFour multi-function input terminals, realizing
functions including fifteen section speed control, Program running, four-section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functionsMultifunctional
Output Terminal1 multi-function output terminals for displaying
of running, zero speed, counter, external
abnormity, program operation and other
Information and warnings.Acceleration/ deceleration Time Setting0~999.9s acceleration/deceleration time can be set individually. Otherfunctions
PID ControlBuilt-in PID controlRS485Standard RS485 communication function(MODBUS)Frequency SettingAnalog input: 0 to 10 V, 0 to 20mA can be
selected;
Digital input:Input using the setting dial of the
operation panel or RS485 or UP/DOWN.
Note:AVI terminals can be used to select an
analog voltage input(AV) and analog current
input(AI) through the switch J2.
Note: AVI terminals can be used to select an
Analog voltage input (AV) and analog current
Input(AI) through the switch J2.Multi-speedFour multifunction input terminals, 15 section
speed can be setAutomatic
voltage

Product series models

ModelInputPower
Output
(KW)Capacity
(KVA)Current
Output
(A)Load
Capacity
(60s)(A)Motor
Equipped
(KW)S800-2T0.4GE1PH/3PH
220V-
50/60HZ0.41.02.53.750.4S800-2T0.75GE0.752.05.07.500.75S800-2T1.5GE1.52.87.010.501.5

Six outstanding standing funcyions and quality:

1.Intelligent parameter setting.
2.Low frequency high torque.
3.Multi-segment run.
4.Automatic voltage regulation.
5.RS485 communication.
6.Low noise.

NIne protectiveness take care of your equipment:
1.Overload protection.
2.Overheat protection.
3.Over-voltage protection.
4.Low-voltage protection.
5.Overcurrent protection.
6.Lost phase protection.
7.Ground protection.
8.Short circuit protection.
9.Stalling protection.

Mini frequency converter is suitable for light load. For example: Fan, Engraving machine, Convetor.

Thanks For Looking !!!