China 2 Inch Electromagnetic Sewage Flow Meter Irrigation Water Flowmeter RS485 Modbus

2 Inch Electromagnetic Sewage Flow Meter Irrigation Water Flowmeter RS485 Modbus
The electromagnetic flow meter is suited for flow measurement of all liquids with a minimum conductivity of 5 µS/cm, like chemicals, water with mud, beverages, rough and drink water and others. The flow measurement is independent of density, temperature, pressure and viscosity of the medium.
The operating principle of the electromagnetic flow meter is based on Faraday's law of magnetic induction.
Product parameters:

ProductDGS-002SizeDN15 - DN1200MediumFor conductive liquids with conductivity greater than 5 us/cm, for reference note tap water has conductivity between 5-50 us/cm.TemperatureAmbient: -25 to 65 Deg C/ Medium: PTFE lining 70 Deg C maxConductivity≥5μS/cmAccuracy0.5%, 0.3%, 1%Repeatability±0.1%, ±0.2%Rated Pressure1. 0.6Mpa--DN1200
2. 1.0Mpa--DN200~DN1000
3. 1.6Mpa--DN100~DN150
4. 4.0Mpa--DN15~DN80
5. Non-standard can be customized by customerDisplayInstantaneous flowrate, total flow, diagnoticsSignal OutputAnalog 4 - 20mA, isolated
Totalization pulses, frequency 0 - 5kHz, communication RS485Power SupplyAC220V 50Hz / DC24V /3.6V Lithium BatteriesConverter TypeCompact/Remote Protection Grade IP67/ IP68Velocity0.5-10m/s (0.1-12m/s, 0.1 to 0.3 m/s accuracy is ±2.0%)LinerEbonite, Neoprene Gum( DN40-DN1200); Polyurethane( DN25-DN300); F4(DN10-DN1200) ;
F46( FEP)(DN15 -DN600); Ceramics(DN15-DN300);Flowing DirectionForward, ReverseElectrode MaterialSUS316(Standard), HB, HC, Titanium, Tantalum, Platinum-iridium alloy, WolframElectrode TypeStandardElectrode Number2-4 pcsFlange MaterialSS/ CSAlarm (N.O.)Empty, excitation, high/low flowrate limitAmbientTemperature: -25 - +60ºC, Humidity: 5-90%CommunicationRS-485/ModBus, Hart, Profibus-DP, Profibus-PA, GPRS, NB-Iot

How to choose lining material?

Lining materialApplicationsNeopreneWater,sewage and slurry,mineral serosity of low abrasionPTFEStrong corrosive mediums such as strong acid and alkaliPolyurethaneA pplicable in mineral serosity,slurry and coal slurry of high abrasion.PFAApplicable in state of load pressureF461.The same as PTFE.
2.Applicable in mediums of low abrasion.

How to choose electrode material?

Electrode materialApplicationsSS316LApplicable in water,sewage and corrosive mediums.Tungsten carbideApplicable in mediums of no corrosive and low abrasion.Hastelloy B(HB)Having strong resistance to hydrochloric acid of any consistanceHastelloy C(HC)Be resistant to oxidable acid such as nitric acid,mixed acid etcTitaniumSeawater,and kinds of chloride,hypochlorite salt,oxidable acid etcTaHydrofluoric acid, fuming sulfuric acid, alkali remaining chemicals etcPlatinum-iridiumChemical mediums except for aqua fortis,ammonium salt.

Main application:
1) Flow measurement of water supply pipe network
2) Measurement monitoring
3) Zone measurement
4) Regional leakage control
5) Flow measurement in water industries (tap water, industrial water and sewage disposal), metallurgy, chemical industry, textile, papermaking, electric power, pharmacy, food industry, etc.

Installation:
Factory introduction:

Packing and delivery:

FAQ:

How is the flow meter warranty?

We could provide 12 months warranty for your flow meter .

Could you provide me the shortest lead time?

Our shortest lead time is 5~7 days after your payment.

How to pay for that ?

Of course we could accept T/T, Paypal, Trade Assurance Order, Western Union, you will get full protection for your orders.

Do you accept OEM?

Yes, we accept OEM.

How to deal with the after-sales?

We have 1-year-warranty with 24/7 on-line support and video technical support. If the flowmeter can't work in 6 Months, we can send you a new flowmeter.