China 2000L Fertilizer Powder Conical Mixer

2000L Fertilizer Powder Conical Mixer
our official website:www.1985shengli.com
Advantages
Best mixing effect
Multi-track revolution and rotation mixing
Low power and large output
No damage to the raw material
Completely discharging with no leftover
Working principles:
Double screw conical mixer has 4 direction forces:
1. Two inner asymmetric spiral upgrade materials by rotation.
2. Tumbler low-speed rotation makes materials circle motion.
3. Spiral rotation and revolution make materials absorbed while diffuse to circle direction.
4. Two flow materials upward then down to center, which come into being a download material flow. This way can full the bottom gap and from a convective circulation.
Application:
Conical mixer is widely used in chemical, agriculture, dyestuff, food, pigment, battery material, rare earth, rubber etc. It can mixer powder with powder, granule with granule, powder with liquid.
Flexible material selection
Material can be chosen from carbon steel, manganese steel, SS304, 316L and 321; Besides, different material can also be used in combination material is different between the part contact with the raw material. Surface treatment for stainless steel include sandblasting, wiredrawing, polishing, mirror polishing, all can be used in different parts of a mixer.
Excellent discharging unit
Spherical valve or plum-blossom dislocation valve is matched to the double screw conical mixer. The raised sphere match the track of the bottom of screw, to reduce the mixing dead zone to the maximum, to make the largest discharging area, and make sure no leftover, spherical valve had excellent sealing effect to powder, liquid and even in the negative pressure state. Plum-blossom dislocation valve is easy to operate, control the discharging speed and be combined with the bottom supporting device of the longer screw.
Powerful auxiliary components
Equipped with circulation medium jacket or steam coil jacket, the double screw conical mixer can realize the temperature control in mixing process.
In the mixer barrel, the part contact with material can coat some antiriot antiseptic, anti-caking and metal isolation material according to different raw material. In some severe wear conditions, the screw plate can be overlaid by some wearing proof alloy.
If a small quantity of liquid is required during mixing, spraying or atomizing unit is necessary in order to mix the liquid evenly with the main ingredient. The liquid adding system is basically composed by the three parts: Pressure source, liquid storage pot and spraying nozzles
Data Sheet

DSH-0.30.182003.5/1203500DSH-0.50.33003.5/1203600DSH-10.66503/7841200DSH-21.212003/785.51500DSH-31.818003/787.52300DSH-42.425001.8/65112520DSH-63.636001.6/65153700DSH-10660001/6518.53980DSH-15990001/65224500DSH-2012120001/44375500DSH-3018180001/44456800