China 2000Mbps Coaxial Ethernet Bridge Coax Adapter

Brief introduction
With the development of digital information age, traditional analog video monitoring camera will be replaced by the HD digital IP camera, but in the procedure of traditional monitoring system improvement, re-wiring is a difficult problem, including the difficulty of execution, environment damage,time limit of the project, cost etc..WD-C1800M-M and WD-C2000M-PoE makes use of the existing video cable to transfer the network signals, can upgrade the traditional monitoring system without any wiring and cost quickly, just plug and play without setting. With Power over Coaxial function.
Specification

ModelWD-C2000M-MInterface1*100/1000 base-TX self-adaptation RJ45, 1*F type 75 1*external powerLED display lightPWR G.hn ETHFrequency band2-200MHzProtocolG.hn, IEEE 802.3 IEEE 802.3u 10/100/1000Ethernet StandardSecurity128-bit AESTransmission rate2000MbpsModulationOFDMTransfer distance1000mPower consumption≤5WO/SWindows 98/ME/NT/2003/7,Windows XP Home/Pro,Mac OSX ,LinuxSize128.5*93*28.3mm(L*W*H)Weight350gOperating environmentWorking temperature:0ºC-70ºC Working humidity:10%-85% no condenseCertificationFCC,CE,ROHSWorking voltageDC 44-57V

Installment:

1.Replace the analog camera to the net camera(IPCAM) or add a video server.
2.Add a WD-C2000M-PoE coaxial cable Ethernet bridge behind the side of IPCAM or video server which support PoE to supply power.

3.link a WD-C2000M-M local side coaxial Ethernet bridge at the other side of the coaxial cable after being connected with the coaxial cable.
4.Put power adapter DC44-57V to WD-C1800M-M
5.The traditional analog monitoring system is upgraded into the high digital network monitoring system through above operations.
6.Power over Coaxial