China 2000Mbps Coaxial Ethernet Bridge for High Digital Network Monitoring System

With the development of digital information age, traditional analog video monitoring camera will be replaced by the HD digital IP camera, but in the procedure of traditional monitoring system improvement, re-wiring is a difficult problem, including the difficulty of execution, environment damage,time limit of the project, cost etc...WD-C2000M-M and WD-C2000M-PoE make use of the existing video cable to transfer the network signals, can upgrade the traditional monitoring system without any wiring and cost quickly, just plug and play without setting. And Built-in PoE Injector to provide DC55V, 30w power via CAT5E / CAT6.

Topology

Model

WD-C2000M-M

Interface

1*100/1000 base-TX self-adaptation RJ45, 1*F type 75 1*external power

LED display light

PWR G.hn ETH

Frequency band

2-200MHz

Protocol

G.hn, IEEE 802.3 IEEE 802.3u 10/100/1000Ethernet Standard

Security

128-bit AES

Transmission rate

2000Mbps

Modulation

OFDM

Transfer distance

1000m

Power consumption

≤5W

O/S

Windows 98/ME/NT/2003/7,Windows XP Home/Pro,Mac OSX ,Linux

Size

128.5*93*28.3mm(L*W*H)

Weight

350g

Operating environment

Working temperature:0ºC-70ºC

Working humidity:10%-85% no condense

Certification

FCC,CE,ROHS

Working voltage

DC 44-57V

1,Replace the analog camera to the net camera(IPCAM) or add a video server.
2,Add a WD-C2000M-PoE coaxial cable Ethernet bridge behind the side of IPCAM or video server which support PoE to supply power.
3,link a WD-C2000M-M local side coaxial Ethernet bridge at the other side of the coaxial cable after being connected with the coaxial cable.
4,Put power adapter DC44-57V to WD-C2000M-M.
5,The traditional analog monitoring system is upgraded into the high digital network monitoring system through above operations.
6,Power over Coaxial and Power over Ethernet.