China 2000bph Beer Bottling Equipment

Washing parts
<1>The type of Into bottle is Stainless Steel conveyor belt ,bottle screw shaft connection with Bottle dial .
<2>All 304/316 stainless steel rinse heads with rubber holding parts, water spray style inject design, more save water consumption and more clean .
<3>304/316 Stainless steel Gripper with plastic pad, ensure minimal bottle crash during washing
<4> 304/316 stainless steel washing pump make the machine more durable .Filling parts:
Adopting the way of filling by lifting the bottom of the bottle, plus the function of pre-cover of the centralizing cover with high precise centralization,which ensure the right seating of mouth of the bottle and filling valve,with low liquid loss, it with 2 times vacum pureg the bottle before filling beer ,
Capping parts:
1> pulling and capping system, Procelain capping parts, to protect metal crown cap , make sure minimum bottle crash during capping
<2> All 304/316 stainless steel construction
<3> No bottle no capping
<4> Automatic stop when lack of bottle
<5>Capping effect is stable and reliable ,Defective rate ≤0.2% .
Control system :
Inverter : MITSUBISHI
PLC : OMRON
Touch screen : SIEMENS
Contactor: SCHNEIDER
Thermo- relay :SCHNEIDER
Air-break switch: SCHNEIDER
Proximity switch :TURCK
Photoelectric switch :BANNER
Air circuit system :SMC
Water pump:Nanfang Conveyor belt :
<1>Energy saving. High efficient. Adapt to customer factory layout
<2> Special lubrication system, keep products clean, health, safety
<3>Extended service life
<4>Electric eyes design keep whole line running safety and quickly
<5>Overload protection mechanism to effectively ensure the safety of the machine

Containers and specificationsProject Name:
Complete full automatic 3-in-1 glass bottle beer filling machine 800-20000BPHCarbonated water/ Soft Drink / BeerMaterialShapeFilling volumeFilling level
(mm)Cap typeGlass BottleRound Bottle 200-2000mlDistance from bottle neck According request Screw cap
Crown capAdjustable specifications of the bottle type[Middle Mould base]Bottle diameter Φ50~Φ85mm Bottle Height 105~300mmCustomers need to buy additional change-over parts for the different bottles.
If using square bottles, then bottle separating system will be added.Carbonated Drink
PreparationSyrup melter/ Mixing machine/Filter/Co2 Filter/CO2 Mixer .....Machine Filling
ProcessingWashing bottle --- CO2 into bottle --- Vacuum --- CO2 --- Vacuum --- Filling Beer --- Capping

Drink Mixing Machine.
1. suitable beverage types: Cola and lemon.
2. mixing ratio range: 3:1 - 6:1
3. CO2 content: 4 times
4. volume: CO2 consumption of about 4 M3/h
5. CO2 supply pressure: 0.8-1 Mpa
6. CO2 Purity: 99.9%
7. consumption of ethylene glycol solution: water=30M3/h
8. ethylene glycol solution pressure: 1.0Mpa
9. ethylene glycol solution inlet temperature: -2 CAutomatic Glass bottle Labeling Machine.
1/Heat shrink sleeve labeling machine
2/OPP Hot melt labeling machine<in picture>
3/PVC label stick labeling machine
It adopts double driving structure which is a new and advanced driving device for the thermal shrink sleeve machine, that is, four-wheel driving, self-centering and balanced pressure of four wheels. It can achieve the good effect of transmission of labels smoothly, stably and rapidly.

Bottle packing machine
1/PE film shrink wrapping machine<in picture>
2/Half-tray shrink wrapping machine
3/Carton box packaging machine
It adopts the photoelectric sensor to detect online, gather signals which are controlled by PLC, and adopts piston as executable element, to realize product conveying, combination, film wrapping, cutting, heat& shrink, cool and finally get the finished product.