Full Function Adjustable Waterproof Power Supply 200W
1. Universal AC input
2. Built-in power factor correction
3. Protections: Short circuit/over load/over voltage/over temp
4. Cooling by free air convection
5. OCP point adjustable through output cable or internal potentiometer
6. IP67/65 design for indoor or outdoor installations
7. Suitble for LED lighting and moving sign applications
8.3Year warranty
HLG-200WModel HLG-200-12HLG-200-20HLG-200-24HLG-200-36HLG-200-48OUTPUTDC voltage12V20V24V36V48VConstant current region6~12V10~20V12~24V18~36V24~48VRated current14A10A8.4A5.6A4.2ARated power168W200W201.6W201.6W201.6WRipple & noise150mvp-p150mvp-p150mvp-p200mvp-p200mvp-pVoltage ADJ range10.8~13.5V17~22V22~27V33~40V43~53VCurrent ADJ rangecan be adjusted by internal potentiometer or through output cable7~14A5~10A4.2~8.4A2.8~5.6A2.1~4.2AINPUTVoltage range90~264VAC, 47~63Hz, 127~370VDCAC current2.0A/115VAC, 1.1A/230VACPower factorPF> 0.95/230VAC, PF> 0.98/115VAC(full load)Efficiency92%93%94%94%94%Inrush currentcold start current 35A/115VAC, 75A/230VACLeakage current< 0.75mA/240VACPROTECTIONOver current95%~108%protection type: constant current limiting, auto-recovery after fault condition is removedShort circuitHiccup mode, recovers automatically after fault condition is removeOver voltage14~17V23~27V28~34V41~46V54~60Vprotection type: Shut down o/p voltage re-power on to recoverOver temperature100º C± 10º C (RTH2)protection type: Shut down o/p voltage re-power on to recoverENVIRONMENTWorking temp. humidity-20º C~+60º C, 20%~90%RHStorage temp. humidity-40º C~+85º C, 10%~95%RH non-condensingWithstand vibration10~500Hz, 2G 10min/1cycle, period for 60 minutes, each axesSAFETYWithstand voltageI/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVACIsolated resistanceI/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDCFITSTANDARDSSafety standardFit UL1310 CLASS2, TUV EN61347-1, EN61347-2-13, IP65approvedEMC standardFit EN55015, EN61000-3-2 Class C(> 60%load): EN61000-3-3OTHERDimension247*69*39mm (L*W*H)Weight/packing1.3kg/20pcs/27kg/0.033m³ /1.07CUFTNOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25º C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.