China 200ml - 2L Full Automatic Pet Bottle Blow Molding Machine

200ml - 2L Full Automatic Pet Bottle Blow Molding Machine

BM-A4 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Equipment List:

No.NAMEMODELPOWERQUANTITY1Blow Molding MachineBM-A441KW1set2Preform unscramblerSP-A43HP Air Compressor 4.8m3/min/30Kg60KW1set4Cold dryer system4.0m3/min/30Kg2KW1set5LP Air Compressor1.6 m3/min/10Kg15KW1set6Cold dryer system2.0 m3/min/30Kg0.45KW1set7Air Tank1m3/min/30Kg/1set8Mold Chiller5HP4.6KW1set9High-pressure oil pipe 15m10Blowing mold500ml4cavities/1set1000ml4cavities/1set1500ml4cavities/1set2000ml4cavities/1set11Spare parts 1set12Installation tools 1set

Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Use SMC air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.

Technical parameters:

ItemBM-A4Bottle type specificationCavity4Theory output3000-4000Max.volume2LBottle mouth maximum overall diameter28-38mmBottle biggest diameter65mmBottle maximum height280mmPower specificationsLight tube quantity32pcsLight tube power1.5KWMaximum heating power40KWAll electric machine installation41KWActual consumption20KWAir pressure specificationWork pressure7-9kg/cm2Low-pressure gas consumption1600L/minBlow bottle pressure25-35kg/cm2Higher -pressure gas consumption1500Ltr/minForzen water specificationWork pressure5-6 kg/cm2Temperature range10ºCConsumption5000kcal/hrForzen water flow50L/minMachine specificationSize of the machine3.4x1.6x1.9Weight of the machine2ton

Main parts:

NameBrandOriginalCylinderSMCJapanvalveSMCJapanPhotoelectric switchXINCHINATouch screenMCGSCHINAPLCMitsubishiJapanTransducerSMCJapanservo motorHUICHUANGCHINA

Free spare part list:

NUMBERNAMEQTY/SET1Lamp102Seal ring103Tool box14stop button15starting switch16connector207Detection switch18Magnetic switch49Pressure regulating table110Temperature control module2

Fuctions of the accessory machines:
Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmosphere to the required pressure.
Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.
Air filter is to clear up the impurities out of the compressed air, like carbon hydrogen, tiny dust and solid particles.
Air tank is to keep the air stable ,to protect the Hp air compressor.

Water Chiller is to Cool the mould ,to prolong the life of the mould.