China 2014 High Speed 3 Side Sealing Bag Making Machine

Deguang-Sealing In life
Configuration:
1. Main transmission control: Using the crank rocker push-pull type connecting rod structure.
A) Main motor: Frequency motor 1pc, power 3 kw.
B) Speed-down motor: Taiwan Speed-down motor 1 pc
C) Main frequency inventer: Japan panasonic inventer 1pc.
2. Tracking system: Adopt digital ac servo control.
A) Former tracking: Japan pansonic servo motor 1pc, power 1.0kw
B) Behind tracking: Japan pansonic servo motor 1pcs, power 1.5kw.
3. Unwinding system: Adopts horizontal level a transitions of feeding(air shaft 1pc).
A) Unwinding motor: Taiwan frequency motor 1pc, power 0.4 kw.
B) Frequency control: Japan pansonic frequency inventer 1pc, power 0.4kw.
C) Unwinding EPC: Auto double line EPC, photocell (domestic)2pcs.
D) EPC motor: Synchronous motor 1pc, power 0.14kw.
E) Unwinding tension: Ningxia break 1pc, japan rotary encoder 1pc.
F) Unwinding air shaft: 1pc;
4. Mid sealing device:
The device is powered by a guide roller, adjustable elevation guide roller, mould plate main pillar, guide rod, guide wheel, blade. Mould plate according actual size to making.
Slitting material film through the guide rollers, adjustable the elevation guide roller, folded up through the mould plate, guide rod, guide wheel, blade. Into vertical sealing.
This device for Mid sealing, it will be stopped when making 3 side sealing...
5. Mid sealing(gussest) device:
The device powered by guide wheel, gussedt plate, when making mid sealing(gusset)bag should making gusset plate, gussedt plate size according actual size to confim. And connection with mid sealing mould plate...
6. Conveyor: Taiwan speed-down motor 1pc, 0.22 kw.
7. Length control: Photocell(Futai)1pc.
8. Auto control system: Industry computer, 17'Touch screen
9. Temperature control: Computer centralized control, K-type thermocouple detection; Total 18 line, PC± 2C° .
10. Pneumatic components: The Shanghai xinyi cylinder, the United States Newman, Taiwan Yadeke etc.
11. Punching system: Punch beam 2 sets;
Mate punch shaft 2 sets (punch mould: Easy open and round hole can be changed each other)
Hand type mould 1 set(Mould shape according customer requires)
12. Rewinding device: 1pc. (for cutting side weasting )
13. Longitudinal and transverse heat-sealing device: Longitudinal is adopt (cooling, heating)Combination bridge spring structure
Transverse is adopt(3 heating, 2 cooling) spring structure.
Sealing bar specification and quantity: :
A) Horizontal sealing hot pressure: 3 sets, the upper and lower electrothermal board power 3.0 KW/block, , width is 90 mm
B) Horizontal sealing cooling: 1 set, and the upper and lower LengTang knife length is 460 mm, width is 90 mm.
C)Tthe hot sealing bar: Hot bar length is 460 mm(total 16 pcs), width10, 15 mm each 2, width 20, 30, 40, 50mm each 3 pcs.
D)Longitudinal sealing hot pressure: 4 sets, electrothermal board and power 3.0 KW/pc, width 60 mm
E) Longitudinal cooling: 4 sets. Upper and lower length 510mm, width: 60mm.
F) Longitudinal hot sealing bar: Hot sealing bar length740mm (total 10pcs)
Width 10mm, 15mm, 20 mm each 2, 30, 40, 50, 60mm each 1.
G)Hot bar, cooling bar material: Aluminum alloy
H) static-eliminator one. (big power)
I) cutter: 2sets. (include machine 1 set)