China 2019 Hot Selling Biomasse Energy Fluid Bed Gasifier in The World

Biomass gasification technology is a technology that converts various biomass energy sources (such as agricultural and forestry waste, municipal organic waste, etc. regardless of rice hull or straw, wood dust, small branches, bark pieces ) into fuel gas through gasification methods.
Biomass materials enter the gasifier through the feed equipment and undergo oxidation-reduction reactions in the gasifier to produce high-temperature fuel gas ( main gas is CO). The ash is continuously discharged through a screw slag conveyor, and gasifier furnace is isolated from the outside by a rotary valve. Therefore, this equipment can work continuously for a long time, and then provides fuel gas for other usage.
Biomass gasification can not only effectively use renewable energy, but also reduce the environmental pollution raising from various organic wastes.

1. Technical Advantages: adopt downdraft fixed bed, low-temperature anaerobic cracking, less tar component, stable gas production, electrical devices controlled by PLC control system, 1 person on duty, safe and stable.
2. Energy-saving Advantages: 60%-80% energy saving than natural gas and LNG
3. Environment Protection Advantages: smaller component of SO2, CO2 in emissions, lower than national environmental standards, ash content<1-1.5%, smoke emissions<50mg/m3
4. Return on investment: Coal-fired boilers will recover their costs within 3-4 months, and oil fuel (gas) fired boilers will recover their costs with in 1-2 months.
5. Use range: 30-50mm Wood chip or plastic waste moisture content 10%-15% rice husk granules, wood granules, peanut shell granules, seeds shell granules, wood chips, corn cob

1. gasifier body and water cleaning system body are made from Stainless Steel to secure long life.

2. plantforms and ladders are protected by rails

3. main parts adopt famous brand products

(1) Device model choice.
(2) According to customer's special requirements, design and manufacture of products.
(3) Training technical personnel for clients.
(4) The company is free of charge to the user on-site engineering and technical personnel planning site for the user to design the best processes and program.

(1) Free to assign a dedicated service personnel, arriving at the scene and guiding customers' installation.
(2) Equipment installation.
(3) On-site training of operators.
(4) Complete sets of equipment installed, 1-2 full-time technical staff to stay free of charge to help customers on-site production of 1 month, until the user' satisfaction.