China 2019 New Sany Crawler Crane for Hot Sale

2019 New SANY Crawler Crane for Hot Sale

Contact
Mobile: +86-19118936257
Feature

1.It is equipped with an advanced full hydraulic drive system and electrical control system;
Moment limiter can not only automatically measure the mass lifted by the crane and the angle of boom, but can also display the rated load, actual load, operating radius and the angle of boom;
All safety devices are overridden under assembling mode, while under operating mode, all safety devices are functioning;
2.Under emergency condition, the crane circuit can be shut off and all operations stopped by pressing the emergency stop button;
When the hook block is lifted to a certain height, the lifting operation of hook block can be automatically stopped so as to prevent against the over-winding of hook block;
When the wire rope is released close to the last three circles, the electrical control system will automatically stop the falling operation of hook block and give an alarm through the buzzer and display;
3.When the operator leaves away from the seat or pulls up the unloading joystick, the unloading valve will be shut off and all operations will be ineffective so as to prevent against false operation;
The anti-tipping device of boom can effectively prevent against the back-tipping of main boom;
Main winch, auxiliary winch and luffing drum are equipped with electrically-controlled ratchet locking device;
4.Electronic level gauge can display the tilt angle of crane upper structure on cluster gauge display;
The monitoring system can monitor the condition of winch mechanism and crane tail in real time;
In the case of lightning strike, lightning grounding device and surge protection device can effectively protect against the damage of electrical system elements and against the hurt of operators;
5.It can achieve GPS satellite positioning, GPRS data transmission, equipment use status query, statistics and remote fault diagnosis.

Parameters

ItemParametersUnitMaximum rated lifting weight of main arm55tMaximum rated lifting weight of fixed auxiliary arm11.4tMaximum lifting moment203.5t.mMaximum rated lifting weight of single pulley at arm end6tMain arm length13-52mSwing angle of main arm-3-80 ° Fixed arm length 7-16m Maximum Size (Length * Width * Height) of Transportation Status Unit 12.04*3.45*3.36 m Fixed Arm Installation Angle 10,30 °Maximum single rope speed of hoisting mechanism125m/minMaximum single rope speed of main arm luffing mechanism87m/minMaximum slewing speed2.4r/minMaximum travel speed1.3km/hGradient30%Average ground pressure0.06MpaEngine power155KW

Picture