China 2021 Diamond Grinding Pins Cups for Grinding Button Bits

2021 Diamond Grinding Pins Cups for Grinding Button Bits
Button bits grinding pin & cups from 7mm to 25mm
Xiamen Bestlink factory design and produce the BTON200,BTON500 and Pneumatic Robot Arm AGM18 etc. pneunatic buttong bits grinding machine.
A full spares back-up service is also available. Also produce the grinding pins/cups, available with a choice of Hemispherical, Ballistic Semi Ballistic, Paraboloid or Conical pins, in sizes 7mm to 25mm.
Other sizes available on request.
PREVENTION MEASURES AND INSTRUSTIONS FOR MACHINES OPERATORS
BEFORE USE:
Check that the machine is stable and that the grinder is correctly and tightly fitted to the machine.
Check the integrity of the guards protecting parts in motion.
DURING USE:
Report immediately any inappropriate functioning or dangerous situations;
The operator's position needs to be such as not to be in contact with the parts in movement;
Do not remove or modify protection devices;
Do not intervene on mobile parts during the functioning of the machine;
Do not get distracted.
AFTER USE:
Correctly position the machine without leaving the tool suspended;
Carry out the review and maintenance operations needed to reuse the machine with the power supply disconnected;
In the maintenance operations comply with the indications of this manual;
Clean the machine.
Diamond Grinding Cups
1.Wing (shoulder) drive grinding cup for, with a 8mm diameter shaft(shank) and one O-ring. Suitable for Atlas Copco LSD machines, Jasco, Dorey and KING PIN grinding machine.
2.San drive grinding cup, with a 9mm diameter shaft(shank), suitable for all SANDVIK grinding machines.
3.55 drive grinding cup is for all Atlas grinding machines.
4.Internal hex drive grinding cup is for all CME grinding machines.

ItemSize(mm)For button sharpening6/7/8/9/10/11/12/13/14/15/16/17/18/19/20/21/22/23/24/25For steel removing7-8, 9-10, 11-12, 13-14, 15-16, 17-18, 19-20ProfileSemi-ballistic/Hemi-spherical

All series button bit grinding machine.
1.Hand-held button bit grinder BTON200

Machine ModelBTON200Air pressure, max5-7 bar (100psi)Air consumption2m3/min (50ft3/min) Rate power1.5kwIdling speed20,000 rpmWater flushing
presuure, max4 bar (60psi)Hose diameter, air19 mm(1/2″)Hose diameter, water4mm Weight, exclude hoses3.2 kgSound level80 dBGrinding button sizeΦ7-25 mm

2.Semi-automatic Button Bit Grinder BTON500

Machine ModelBTON500Rotation speed:20000 rpmMotor: Pneumatic (air powered) Work pressure: 5-7 bar (100 psi)Max. air pressure: 8 bar (115 psi)Air consumption: 2.0 m3 / min (80ft3/min)Max. water pressure: 4 bar (60 psi)Air hose diameter: 19 mm Water hose diameter: 6 mmWeight excl. packaging:120 Kg Weight incl. packaging: 130 Kg Packing dimensions: 500*500*1400mmSound level:92 dB(A)

3.Pneumatic Robot Arm Grinder - AGM18

Machine ModelAGM18Rotation speed:20000 rpmMotor: Pneumatic (air powered) Work pressure: 5-7 bar (100 psi)Max. air pressure: 8 bar (115 psi)Air consumption: 2.0 m3 / min (80ft3/min)Max. water pressure: 4 bar (60 psi)Air hose diameter: 19 mm Water hose diameter: 6 mmWeight excl. packaging:330 Kg Weight incl. packaging: 350 Kg Packing dimensions: 1600*700*1500mmSound level:92 dB(A)

Before griding & after grinding.