China 250ml Water Bottle Blowing Machine

7000BPH pet blowing machine/250ml water bottle blowing machine
FG series full- water bottle blowing machine is the most stable two-step automatic stretch blow moulding machine. It has four cavities and the maximum capacity of the products is 2L. The capacity can be 6800-8000BPH, It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET etc.
The 250ml water bottle blowing machine advantages:
1) Minimize distance of heating heats, maximize the heating efficiency;
2) Molularized design convenient for maintenance and changing changeovers;
3) Efficient and soft perform inlet system, ensure speed and preform protection;
4) Servo driving and cam linking movement blowing section.
Electric configuration used on our 250ml water bottle blowing machine:
Magnetic valve& cylinder used Germany FESTO
Servo system choose Japan Panasonic
Frequency inverter& touch screen use Japan Mitsubishi
Blowing valve is USA PARKER
One-way valve& Throttle valve choose Germany FESTO
Reducing valves are Germany duray.
Our water bottle blowing machine advantages:
1)High Automatization for pet blow molding machine
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6800BPH(4-cavity)
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
Why you choose our 250ml water bottle blowing machine? Please check blow:
1) The unique cam linking system integrates mold-opening, mold-locking and bottom mold-elevating in onemovement, equipment with high speed servo driving system which greatly shortens the blowing cycle and accelerates the speed;
2) Heater distance in the heating oven is minimized to 38.1mm, compared with the conventional heating oven, it saves more than 30% electricity consumption. Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature in the heating zone.
Technical parameters
Type
FG4
Mark
Specifications of bottle
Mould number(piece)
4
maxi volume (mL)
2000
maxi height (mm)
328
maxi diameter (mm)
105
Square bottle for max diagonal length (mm)
115
preform Specifications
Suitable inner bottle neck (mm)
20-25
preform max length (mm)
150
Capacity (bottles / hour) at 17 g 500mL
7200
Electricity
Install power (kw)
51
Heating oven total power (kw)
46
Heating oven actual power consumption (kw)
26
Voltage / frequency (V / Hz)
380v,50hz
Allowed voltage fluctuation
±10%
HP Air
Pressure(bar)
30
Capacity(m³/min)
4
Cooling Water
Mold water
pressure(bar)
4-6
Water chiller
6HP
Suitable temperature range (ºC)
6-13
Flow (L / min)
45
Oven water
pressure(bar)
4-6
Water chiller
3HP
Suitable temperature range (ºC)
6-13
Flow (L / min)
22
Machine Specification
host machine dimension (m) length x width x height
3.3*1*2.3
Weight (Kg)
3200
Blowing Machine
Heating Oven:By rotary and soft preform loading system, the speed of preform feeding is ensured, menawhile, the preform neck is well protected.
Bottle Outlet:The machine adopts modularized design concept to make it convenient and cost-saving for the maintenance and changing changeovers.

Configuration
Item
Brand
Origin
Magnetic valve
FESTO
Germany
Cylinder
FESTO
Germany
Servo system
Panasonic
Japan
Frequency inverter
Mitsubishi
Japan
PLC
Mitsubishi
Japan
Touch screen
Mitsubishi
Japan
Blowing valve
Parker
USA
One-way valve
FESTO
Germany
Throttle valve
FESTO
Germany
Reducing valve
DURAY
Germany
It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines.
Transportation:
It is located in the beautiful port city of Zhangjiagang with convenient traffic; it's about 150 km away from Shanghai.
Products:
PVC/HDPE/PP-R pipe extrusion line, PVC & WPC profile extruding line and plastic sheet production lines with the relative auxiliary machine, PE film/ PET bottles recycling line and pelletizing lines.Market:
Our products have been exported to Middle East, Southeast Asia, South America and Europe etc. We received the universal confirmation and trust from our customers except of the precious experience.
Idea:
Abide by the logos of "Sincerity, Development, innovation, Win-Win" constantly, we are honorable to cooperate with friends at home and abroad by providing the high quality products, technology and service!