China 2t D Soybean Oil Refinery Machine Mini Crude Oil Refinery

2t/d soybean oil refinery machine mini crude oil refinery
Traditional deacidification method generally refers to the three methods used for deacidification methods of industrial production, including chemical deacidification, physical refining (or deacidification) and mixed oil refining (or deacidification).
Chemical deacidification known as alkaline deacidification, is the industry's most widely used method, is usually adding lye to the degummed oil to make lye and free fatty acid (FFA) reaction, FFA precipitation in the form of soap, some impurities are also adsorbed by soap, soap feet is separated and removed by centrifugation. Chemical deacidification, usually uses caustic (sodium hydroxide). Neutral oil hydrolysis occurs under action of an alkali, a large number of fat loss; In addition, the neutral oil is also entrained soapstock resulting in loss of neutral oil. Soap generate required sulfuric acid treatment, resulting in a large number of waste water to cause environmental pollution, oil consumption depends on FFA content of crude oil, FFA content is higher, the greater consumption of oil. This method of deacidification is more thorough, stable oil quality.
Physical deacidification is a method steam passes into the oil so that the steam carries and remove FFA, unsaponifiables, and odor substances under high vacuum conditions.
Compared with chemical deacidification, the method is no soap produced, therefore low oil consumption, high FFA quality, and easy to operate, require steam, less water and power, requiring low investment, some of the heat-sensitive pigments (carotenoids) and odor material are also removed by the steam stripping. Compared with the alkaline deacidification, physical deacidification with a high yield, no soap production, and reduce the amount of spills, reduce environmental pollution, etc; but there are very strict with pretreatment of crude oil, not suitable for heat-sensitive cottonseed oil, and the disadvantage of polymers and trans fatty acids produced at high temperature.
This technology has the following advantages:
1,The bleaching earth and oil is mixed in a vacuum state, to avoid the impact of air, to make higher utilization of bleaching earth, better bleaching effect, at the same bleaching effect, less consumption of bleaching earth.
2,based on needs of bleaching, it can count accurate and automated metering addition ratio of bleaching earth.
3,Continuous perfect mixing process make all the bleaching earth particles are uniformly in contact with the oil.
4,Temporary storage tank of bleaching oils adopts negative pressure design, effectively avoid contact with the oil and air, making the quality of the intermediate products and the final product more stable.
5,Filtration of bleached oil is taken in a sealed stainless steel leaf filter press, residual oil of filter cake is low, easy operation, low failure rate.
6, Filter press with automatic control system, make the operation more streamlined, producing more stable.
Pictures details:

ItemPictureMachines in workshopHalf made oil refineryCustomer visitLoadingInstallation site abroadOil refinery in factory of users

Welcome to send inquiry about 2t/d soybean oil refinery machine mini crude oil refinery.

Name2t/d soybean oil refinery machine mini crude oil refinerycapacity1t/dproduction time10 daysPackagefilm packagepaymentTT