China 3 Channel Rotary Dryer

The wet material is pushed into the feeding machine, and the homogenizer homogenizes the material before the discharge port of the feeding machine. The machine breaks up the material. The loose material is sent to the feeding port through the feeding machine, and then the hot air and humidity The objects enter the central cylinder to rotate together, flow along the middle annular channel, fold back again, and pass through the outer annular channel to the discharge port of the drying cylinder. The materials in each channel are transported under the pressure of high-temperature air flow and dried in a suspended state. There are also blades in the channel to carry the scattered materials. The tiny debris passes through the dryer at almost the same speed as the air flow. The wet and heavy materials in the middle and outer annular channels fall from the material, but due to the rotation of the drying cylinder, they are brought back by the blades and returned to the air stream, constantly surrounded by the drying medium. The dried material enters the discharge system with the air flow, and the mixed debris is deposited into the deposition device and sent out regularly. After the material is separated by the collector, the dry material is discharged into the baler bale from the closed air discharger and discharged from the collector The exhaust gas is discharged into the atmosphere, or recycled.