China 300L Cip Cleaning System

Specifications of CIP cleaning system

1. Made of SUS304/316L
2. Four tanks for cleaning solution
3. Mounted as a whole system
4. Easy to move

Descriptions of CIP cleaning system

The CIP system is installed on a frame and supporter which is easy for transportation especially for exporting, the operating principle of the full auto CIP cleaning system means that the tank body, pipelines, pumps and all valves and also the whole processing line are cleaned on line no need to disconnect the pipes or the equipments, all cleanings are done at the closed circuit.
The CIP Cleaning system is too carry out circulation cleaning under the condition that no need to open the equipment (tank, pipe, pump, valve etc.) and the whole producing line. The CIP system is controlled by Siemens PLC, full-auto controller. The plate-type heat exchanger will heat on line, the concentration test of acid alkali, the upper and lower liquid level of tank, control valve, all use imported products with high quality. The CIP system is full-auto operation control.

Main components of CIP cleaning system

1. CIP cleaning liquid storage tanks (include acid tank, alkali tank, hot water tank, clear water tank).
2. Two not big storage single layer tanks for concentrated acid and alkali.
3. CIP forward and return pumps.
4. Two diaphragm pumps for acid/alkali concentrate.
5. Heat exchanger (plate or tubular type).
6. One electrical appliance box.
7. One set of controlling pipe and valve component.
8. One set of auto-performance components and parts and the electrical appliance material.
9. According to the customers requirements, we can make the double circuit, three circuit, four circuit and so on. Meanwhile we can make multi circuit operating at the same time.

Heating way of CIP cleaning system

Plate type, coil tube type, tubular type.

System control elements of CIP cleaning system

This system adopt the PLC program to control, with the colored touch --screen to operate and display the whole process flow and also the each controlling parameter. The temperature of the cleaning liquid can be installed. It can set the pH value, the cleaning time, cleaning sequence and also the refluence pH value. With the system malfunction alarm device.

Operating principle of CIP cleaning system

1. Auto-flow control for the cleaning solution.
2. Automatically regulate the temperature of the cleaning liquid.
3. Auto-compensate for the inside tank liquid level.
4. Automatically-compensation for the acid and alkali concentration.
5. Auto transfer from one cleaning liquid to another.
6. System auto alarm-device.

Photos of CIP cleaning system

Tank size
300L
CIP tank type
Alkali tank, acid tank, hot water, clean water tank, water recycle tank
Cleaning recycles
Single circuit, double circuits, three circuits, four circuits
Heating method
Coil pipes inside plate tubular
Automatic types and charastics
Full Automatic

1. flow rate auto control;
2. temperature auto control;
3. auto compensate the cip liquid level;
4. auto compensate the liquid concentrate;
5. cleaning liquids auto transfer;
6. auto alarm

Semi-auto control

1. temperature auto control
2. electrical control with manual operate the other matters.

Manual operation

1. manual operate on the cleaning process