China 300psi Pressure Pipe Fittings Ductile Iron Threaded Mechanical Tee

300psi Pressure Pipe Fittings Ductile Iron Threaded Mechanical Tee
Specification of Mechanical Tee(Threaded)

Nominal Size mm/inPipe O.D mm/inWorking Pressure PSI/MPaBolt Size Dimensions mm/inHole cuting dimensionsNo.-Size mmØABCmm/in50*2560.3*33.73002-M10*55781155874382*12.375*1.3272.073.0714.5272.2832.9131.50050*32 60.3*42.4 300781155874462*1¼2.375*1.6692.073.0714.527 2.2832.9131.850*4060.3*48.3 300781155874462*1½2.375*1.9002.073.0714.5272.2832.9131.865*2573*33.73002-M12*60971386877382½*12.87*1.3272.073.8195.4332.6773.0311.565*3273*42.4300971386884512½*1¼2.87*1.6692.073.8195.4332.6773.307265*40 73*48.3300971386884512½*1½2.87*1.9002.073.8195.4332.6773.307265*2576.1*33.7300991407077383OD*13*1.3272.073.8985.5122.7563.0311.565*3276.1*42.4300991407084513OD*1¼3*1.6692.073.8985.5122.7563.307265*40 76.1*48.3300991407084513OD*1½3*1.9002.073.8985.5122.7563.307280*2588.9*33.73002-M12*651121507679383*13.500*1.3272.074.4095.9062.9923.1101.580*3288.9*42.43001121507684513*1¼3.500*1.6692.074.4095.9062.9923.307280*4088.9*48.33001121507684513*1½3.500*1.9002.074.4095.9062.9923.307280*5088.9*60.330011215076100643*23.500*2.3752.074.4095.9062.9923.9372.500100*25114.3*33.73002-M12*751401769079384*14.500*1.3272.075.5126.9293.5433.111.5100*32114.3*42.43001401769092514*1¼4.500*1.6692.075.5126.9293.5433.6222100*40114.3*48.33001401769092514*1½4.500*1.9002.075.5126.9293.5433.6222100*50114.3*60.330014017690107644*24.500*2.3752.075.5126.9293.5434.2132.500100*65114.3*7330014017697114704*2½4.500*2.8742.075.5126.9293.8194.4882.75100*65114.3*76.130014017697114704*3OD4.500*32.075.5126.9293.8194.4882.75100*80114.3*88.930014017695134894*34.500*3.5002.075.5126.9293.745.2763.5

Nominal Size mm/inPipe O.D mm/inWorking Pressure PSI/MPaBolt Size Dimensions mm/inHole cuting dimensionsNo.-Size mmØABCmm/in125*25139.7*33.73002-M16*8516621510379385.5OD*15.500*1.3272.076.5358.4654.0553.111.5125*32139.7*42.430016621510392515.5OD*1¼5.500*1.6692.076.5358.4654.0553.6222125*40139.7*48.3 30016621510392515.5OD*1½5.500*1.9002.076.5358.4654.0553.6222125*50 139.7*60.3 300166215108107645.5OD*25.500*2.3752.076.5358.4654.2524.2132.500125*65 139.7*76.1 300166215108114705.5OD*3OD5.500*32.076.5358.4654.2524.4882.75125*80139.7*88.9300166215108132895.5OD*35.500*3.5002.076.5358.4654.2525.1973.5150*25165.1*33.730019224111679386.5OD*16.500*1.3272.077.5599.4884.5673.111.5150*32165.1*42.430019224111692516.5OD*1¼6.500*1.6692.077.5599.4884.5673.6222150*40165.1*48.330019224111692516.5OD*1½6.500*1.9002.077.5599.4884.5673.6222150*50 165.1*60.3300192241121107646.5OD*26.500*2.3752.077.5599.4884.7644.2132.500150*65165.1*76.1300192241126114706.5OD*3OD6.500*32.077.5599.4884.9614.4882.75150*80 165.1*88.9300192241126132896.5OD*36.500*3.5002.077.5599.4884.9615.1973.5150*25165.1*33.730019424311779386*16.500*1.3272.077.6389.5674.6063.111.5150*32168.3*42.430019424311792516*1¼6.625*1.6692.077.6389.5674.6063.6222150*40168.3*48.330019424311792516*1½6.625*1.9002.077.6389.5674.6063.6222150*50168.3*60.3300194243122107646*26.625*2.3752.077.6389.5674.8034.2132.500150*65168.3*73300194243127117706*2½6.625*2.8742.077.6389.56754.6062.75150*80168.3*88.9300194243127134896*36.625*3.5002.077.6389.56755.2763.5200*25219.1*33.73002-M16*10025030514579388*18.625*1.3272.079.84312.0075.7093.111.5200*32219.1*42.430025030514592518*1¼8.625*1.6692.079.84312.0075.7093.6222200*40219.1*48.330025030514592518*1½8.625*1.9002.079.84312.0075.7093.6222200*50219.1*60.3300250305150107648*28.625*2.3752.079.84312.0075.9064.2132.500200*65219.1*76.1300250305155117708*3OD8.625*32.079.84312.0076.1024.6062.75200*80219.1*88.9300250305155134898*38.625*3.5002.079.84312.0076.1025.2763.5200*100219.1*114.33002503051551601148*48.625*4.5002.079.84312.0076.1026.2994.5

Installation Instruction for Threaded&Grooved Mechanical Tee
1. Pipe Preparation
Clean the gasket sealing surface within 16mm of the hole and inspect the sealing surface visually for defects that may prevent proper sealing of the gasket. Don't drill the hole on weld line.
2. Remove burrs
Remove any burrs or slug before installation to protect the gasket and prevent leakage.
3. Gasket&Housing Installation
Insert the gasket into outlet housing and make sure the tab in the gasket line up with the tab recessing in the housing. Align outlet housing over the pipe hole making sure that the locating collar is in the pipe hole.
4. Alignment
Align the strap around the pipe, insert the bolts and tighten the nuts.
5. Tighten nuts
Alternatively and evenly tighten the nuts to the specified bolt torque.
6. Installation complete
There should be even gaps on two sides between the upper and lower housings.
Range of products
Rigid coupling, Flexible coupling, 90° Elbow, 45° Elbow, 22.5° Elbow, 11.25° Elbow, Tee, Reducing Tee(Grooved/Threaded), Cross, Reducing Cross(Grooved/Threaded), Mechnical Tee(Grooved/Threaded), Mechnical Cross(Grooved/Threaded), U-bolted Mechnical Tee, Reducer(Grooved/Threaded), Grooved Eccentric Reducer, Grooved Split Flange, Grooved Adaptor Flange, Cap.
Detailed information

Certificate : UL listed & FM approved

Standard grooved specifications : according to GRUVLOCK

Material : Ductile Iron conforming to ASTM A536, Grade 65--45--12

Thread : BSPT & BSP & NPT

Standard Coat : Epoxy-RAL3000

Optional : 1. painted 2.dacromat 3.galvanized

Color : Red, Blue, Orange, White

Gasket : EPDM / NBR / Silicon Rubber

Bolts and Nuts : ISO 898-1class 8.8

Payment term : T/T, LC at sight
Package : Cartons with pallet/ Wooden case
Delivery time : 25-40 Days
Gasket

GasketMaterialTemperature RangeRecommendations ColorEEPDM-34ºC~+110ºC
(-30~+230ºC)Recommend for hot water, dilute acid, oil-free gas and other mecmicals(except for hybrocarbon) within the specified temperature range. Not recommend for petroleum and hydrocarbon.Green StripDNBR-29ºC~+82ºC
(-20~+180ºC)Recommended for petroleum products, gas with oil vapors, mineral oil and vegetable oil. Not recommended for high temperature materials.Orange StripSSilicon Rubber-40ºC~+177ºC
(-40~+350ºC)Recommended for high temperature and dry air, and some high temperature chemicals.White

Why choose 1nuo?
Weifang Yinuo has strong technical strength and possesses the world's first-class equipment and technology, as well as perfect testing methods. All rough castings of grooved fittings will be processed and produced by electric-furnace smelting, on-line monitoring and control and automatic molding methods. Now our facilities include eleven medium frequency furnace, four advanced vertical parting molding lines and three painting lines. Every customer's requirements can be satisfied by customized services.
Yinuo's ductile iron grooved fittings have successively passed the China national type test, ISO 9001 and FM&UL approvals etc. Our products are underwritten by China Ping An Insurance(Group) Co.,Ltd. The grooved pipe fittings are widely used in fire fighting, air-conditioning, water supply, sewage, cement, low-pressure steaming, mine piping and ordinary piping delivery.
CE Certificate&UL Listed&FM Approved
ø Corporate Vision: Where there is pipes, there is 1nuo.
ø Corporate Mission: Connecting pipeline around the world, benefiting homes in every building.
ø Competitive Strategy: To supply market with perfect products, to win customers with excellent service.
ø Core Value: Pragmatic honesty, quality first, continuous innovation and win-win cooperation.
ø Quality Value: We survive with quality and develop by technology.