China 37HP Air Cooling System Plastic CNC Industrial Water Chiller

Air Cooled Screw Water Chiller with Water tank, water pump
The chiller consists of four main parts: compressor, evaporator, condenser, expansion valve, so as to achieve the cooling and heating effect of the chiller. The Air-cooled industrial water chiller is mainly used to cool the heating components of the equipment to ensure that machine operate with a constant temperature. That it can well worked for process gas compressor's cooling process with low gas temperature as clients required for.
As an industrial water chiller, this air cooled screw chiller has the following FEATURES:
1. Refrigeration Cooling capacity: 180kw~1520kw
2. Cooling conditions: Chilled water inlet temperature is 12˚C, outlet temperature is 7˚C. Ambient temperature is 35˚C.
3. Input power: normal in stock 380V/50Hz.3ph, Allowable fluctuate voltage: ± 10%, allowable voltage difference in phase: ± 2%. Special customize voltage, please inquiry contact us to unit quote.
4. Measuring noise spot: 2m ahead and 1.5m high in front of chiller with average measurement on four dimensions
5. Semi-closed 5: 6 asymmetric twin-screw compressor from world-renowned brand, trouble-free operation over 100000hours.
6. Eight stages volume control or 0%-100% automatic regulation.
7. Fluoride-resistant high-performance motor from French.
8. Use PLC microcomputer control from Germany Siemens LCD touch screen, in English operation manual and human-machine interface.
9. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year.
10. Friendly choose to use environmentally R407C or R134A refrigerant.
11. Free shut-down triangle stars starter
12. Dual refrigeration circuits to each other back-up.
13. Can special customize the professional low temperature Water Chiller, reduce the temperature to -180˚C degree celsius.
Application of Water Chiller
The water chiller is to provide a cooling process in plastic molding, to improve quality of molded products and shorten period of injection molding cycles. Hence maximizes productivity of plastic molding manufacturing Widely used for Plastic molding, electronics industry, electroplating industry, Machinery industry, construction industry, vacuum coating and food industry etc. Divided into water cooled chiller, air cooled chiller.
Model KC-003KC-005KC-008KC-010KC-012KC-015KC-020Power Supply380V/50Hz/3ph (other motor voltage can special customize for the customer)Cooling capacitykW915.221.227.534.842.656.5 kcal/h7,82013,07018,23023,65029,93036,63048,590Heating capacitykW10.718.125.232.741.350.667.1kcal/h 9,20015,53021,65028,12035,50043,51057,720Power consumptionkW2.654.276.558.6511.0513.517.6Chilled water volumem3/h1.42.33.856.27..39.6compressorTypeHermetic scroll / pistonStart-up mode Direct startOutput PowerkW2.33.85.67.59.411.315RefrigerantTypeR-22control method Temperature-sensitive external pressure equalization expansion valveFilling amountkg23.65.16.58.29.613.3Water side heat exchangerTypeShell and tubePipe diameterBPT 1"PT 1-1/2"PT 2" Air heat exchangerTypeInternal thread copper tube finSurface area/rowM20.62/3R0.62/4R1.16/3R1.16/4R1.92/3R2.28/3R3.06/3RAxial fanTypeLow noise axial flowAir volumeCMM65110150195220265390PowerkW0.250.370.550.550.751.10.55x2protective deviceHigh and low voltage switch, antifreeze protection, soluble plug / safety valve, overload protection device, coil overheat protector, temperature automatic protection switch, etc.Dimension (mm)L92092012001200150015001860W85085010501050110011001220H1300130014501450158015801700Weightkg160190300330390430600Model KCPH-25KCPH-30KCPH-35KCPH-40KCPH-45KCPH-50KCPH-5-60Power Supply380V/50Hz/3ph (other motor voltage can special customize for the customer)Cooling capacitykW65.284.297.5113.1125.2139.3167.1kcal/h 56,07072,41083,85097,260107,660119,790143,700Heating capacitykW77.599.6115.2134.3148.5164.9197.2kcal/h 66,75085,67598,212114,369126,830140,855168,560Power consumptionkW21.726.830.535.240.943.352.9Chilled water volumem3/h12.114.316.81921.523.828.5compressorTypeFully enclosed scroll/pistonStart-up mode Direct startOutput PowerkW18.822.526.33033.837.545RefrigerantTypeR-22control method Temperature-sensitive external pressure equalization expansion valveFilling amountkg15.820.423.627.830.333.640.2Water side heat exchanger TypeShell and tubePipe diameterBPT 2-1/2"PT 3" Air heat exchangerTypeInternal thread copper tube finSurface area/rowM23.80/3R4.52/3R5.36/3R6.08/3R6.82/3R7.54/3R9.02/3RAxial fanType Air volumeCMM4405306207608208801060PowerkW0.75x21.1x21.1x21.5x22.2x20.75x41.1x4Protective deviceHigh and low voltage switch, antifreeze protection, soluble plug / safety valve, overload protection device, coil overheat protector, temperature automatic protection switch, etc.Dimension (mm)L1860225024002680280024502560W1220130013001350135023002300H 1700185018501900190019001900Weightkg68095010701150138015101680
Note: 1. Measuring conditions of above specifications and parameters: inlet temperature of frozen water 12ºC, outlet temperature 7ºC, outdoor ambient temperature DB35 C/WB24ºC;2. Scope of work: The temperature range of circulating water is from 5 to 35ºC, and the temperature difference between inlet and outlet water is from 3 to 8ºC. Use at Condensation Temperature not higher than 35ºC.
3. The specifications are subject to change without notice. If there are special requirements, please specify the specifications before ordering.4. The main spare part of equipment Configurationt: Japan Panasonic compressor, USA LKE refrigeration accessories, France Schneider electronic controller, computer control panel; which equipped with high and low voltage switch. For the motor overload protection, lack of reverse phase protection, safety valve and other protective devices; stainless steel water tank coil evaporator and fin condenser .

Air-cooled (heat pump) chiller product introduction
The Keepwin air-cooled chiller and water-cooled water chiller series is the essence of domestic and foreign products. It is manufactured with modern and advanced technology, with high quality and beautiful appearance. At present, the product cooling capacity is from 16000Kcal/hr to 240,000Kcal/hr (8HP-120HP), and the calorific value is 92000Kcal/hr to 288000Kcal/hr (8HP-120HP), which can be widely used in shopping malls, hotels, banks, hotels, theaters and industrial fields. .
Compressor
Selected imported brand-name hermetic reciprocating / scroll and semi-closed screw / reciprocating compressor. Good performance and low noise. According to customer needs and cold tonnage size, single or multi-machine combination. The compressor can be alternately operated according to the load, and the operating hours of each compressor are balanced, which greatly extends the service life of the chiller.
Condenser
The condenser is equipped with high-efficiency tapered fins and internally threaded copper tubes for high heat exchange efficiency and good stability.
Evaporator
The evaporator adopts internal and external threaded reinforced tubes. The inner surface of the copper tube is threaded, and the outer surface of the copper tube is smooth, and the cooling effect is good. The outside of the evaporator barrel is insulated by a 25mm thick PE insulation board, which does not condense and has less loss of cooling capacity.
Protective device
The protection system devices include: temperature control switch, high and low pressure switch, overload protector, compressor overheat protector, compressor frequent start protector and abnormal indicator light.

Computer control system
Configured a high-intelligence PLC and PC-level computer control system for remote monitoring and control. The operation is simple, the host is connected to the power source, the failure rate is low, the safety factor is high, and the installation is simple. System control is instantly adjustable, intuitive and reliable.
Box board
The box plate of the unit is precision machined by CNC punching machine. It adopts electrostatic powder baking paint, which is luxurious and beautiful in appearance, and has good sound insulation effect.
Inquiry to us!
Note:for the other customizing process water chiller & gas compressor, please kindly send below information to our factory to calculate the producing cost for your item.
Clients' inquiries should contain related parameters
A. The gas compression medium
B. Gas composition? or the gas purity?
C. The gas flow rate: _____Nm3/hr
D. Inlet pressure: _____ Bar (gauge pressure or absolute pressure)
E. Discharge pressure: _____ Bar (gauge pressure or absolute pressure)
F. Inlet temperature
G.Discharge temperature
H. Cooling water temperature as well as other technical requirement.