China 3wd Micro Bit Programmable Robot Kit with Control APP

DG007-PM Magician Micro:bit RC Car

This is a combination of DG007-P robot chassis and Micro:bit expansion board. Compared with traditional robot chassis, DAGU add the control board on the chassis. It will reduce the process of selecting controllers for children. We added the expension board, without adding other breadboards, to achieve Pin control. Whether it is motor, servo or other sensors, micro:bit can control these electronic components through this expansion board. For its appearance, it is more suitable for requirements of the Micro:bit secondary robot development.
Micro:bit Expansion Board
1. Left motor drive interface, motor drive maximum support 3A
2. Right motor drive interface, motor drive maximum support 3A
3. Power switch and indicator light, turn on bright red
4. Power input interface, minimum 6.4V, maximum 8.4V, with anti-backconnection protection
5. Crocodile Clamp Interface
6. Battery Voltage Interface
7. Selection of power supply, jumper cap, upper 5V and lower 3.3V
8. I2C interface
9. GND
10. When 7 chooses how much V, the output voltage is the selected voltage.
11. IO interface
12. Fixed hole

Feature
1. With simple contruction, it's easy to assemble.
2. Adapting 2pcs 1:48 gear motors, it's turing flexible.
3. This car kit contain speed measuring code plate. With our Hall Sensor, it can quickly build a set of speed measurement system. It can measure speed, distance and build a closed-loop system.
4. The motor is fixed by a simple and easy-to-assemble motor fixture, which has good fixity and is easy to assemble.
5. Adapting two layer plastic board structure design, it confortable to refitting, such as installing ultrasonic sensors in front of the car, mounting platform brackets on top of the car, etc.

APP + Lesson
We also provide remote control App and English Lesson.

DG007-P include:
1 * chassis top cover plastic plate
1 * chassis plastic plate
2 * DG01D motor (9mm shaft)
2 * rubber wheel 1*universal omni wheel
1 * 5AAA battery holder with 2pin wires
1 * Infrared fixer 1*ultrasonic fixer
1 * hall sensor fixer
1 * speed measuring code plate
1 * a bag of screw
1 * DG007-P manual