Slurry Pumps, G12110 A05, Volute Liner manufacturer / supplier in China, offering 14/12 St-Ah Slurry Pump Volute Liner (G12110 A05), Electric Slurry Mud Sludge Trash Pump (2PN /3 PN /4 PN), Carbon Steel / Stainless Steel Discharge Flange Pipe for Pump and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Piece | Contact Supplier |
Local Area: | Huaan, Jiangsu, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, PayPal |
Max.Head: | 50-80m |
---|---|
Max.Capacity: | 200-300 L/min |
Driving Type: | Motor |
APPLICATION of horizontal slurry pump,slurry pumps, mining pumps, mining slurry pumps, AH slurry pumps
Alumina,Copper mining,Iron ore,Gas oil,Coal ,Electric industry,Phosphate,Bauxite,Gold,Potash, Wolfram,Water sewerage utilities,Sugar,Tobacco,Chemical fertilizer
Specifications of AH horizontal slurry pump
Pump range: 25mm to 450mm (1'' to 18'')
Capacity: 4-5400m3/h
Head: 5-118m
Wet part material commonly is 27Cr white iron alloy or rubber
Other material can be produced as per your specific application
Features of AH horizontal slurry pump
1. Double casings design centrifugal slurry pump, wide passage for solids;
2. Bearing assembly & frame: Both standard & high capacity typies available. A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy duty roller bearing are housed in a removable bearing cartridge. Pump body is fastened with the frame by minimum bolts. Impeller adjustment is provided in a convenient position below the bearing assembly.
3. Impeller & liner material: high chrome white iron, rubber, etc.
4. High efficiency impeller available: up to 86.5% for certain type
5. Interchangeable wet parts material: High chrome alloy metal: PH: 5-12; natural rubber: PH: 4-12;
6. Shaft seal: Packing seal, centrifugal seal, mechanical seal;
7. Discharge branch: 8 positions in each 45°;
8. Driving type: V-belt, flexible coupling, gearbox, hydraulic coupler
Materials list of main spare parts
Part Name
Material
Specification
HRC
Application
OEM Code
Liners & Impeller
metal
AB27: 23%-30% chrome white iron
≥56
Used for higher wear condition with pH between 5 and 12
A05
AB15: 14%-18% chrome white iron
≥59
Used for higher wear condition
A07
AB29: 27%-29% chrome white iron
43
Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuration installation with pH no less than 4
A49
AB33: 33%-37% chrome white iron
It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vitriol, phosphate etc.
A33
Rubber
R08
R26
R33
R55
Expeller & expeller ring
metal
B27: 23%-30% chrome white iron
≥56
Used for higher wear condition with pH between 5 and 12
A05
Grey iron
G01
Stuffing Box
metal
AB27: 23%-30% chrome white iron
≥56
Used for higher wear condition with pH between 5 and 12
A05
Grey iron
G01
frame/Cover plate, bearing house & base
metal
Grey iron
G01
Ductile iron
D21
Shaft
metal
Carbon steel
E05
Shaft sleeve, lantern ring/resctrictor, neck ring, gland bolt
Stainless steel
4Cr13
C21
304 SS
C22
316 SS
C23
Joint rings & seals
Rubber
Butyl
S21
EPDM rubber
S01
Nitrile
S10
Hypalon
S31
Neoprene
S44/S42
Viton
S50