4 Column Type Automatic Duplex Rubber Vulcanizing Press
I. Advantages of the machine
1. Four column structure
2. 3RT (3 stage die sinking)
3. PLC programmable controller
4. Breakdown self check function and display
5. Pressure transducer control system
6. Tubular electric heating element fuse alarm and remind the place of the damaged tubular electric 7. heating element. It is convenient to maintain and change.
II. Technical parameter
ModelXLB-D600x600X2Total Pressure (MN) for Single Press2.0Hot Plate Specification (mm) for Single Press600x600Unit Area Pressure(KG/CM²)5.56Daylight (mm)250Working Layer No.2Working Hydraulic Pressure (Mpa)15.9Mould Closing Speed(mm/s)12Piston Stroke (mm)700Piston Diameter(mm)400Heating ModeElectricHeating Temperature(ºC)140-180Total Motor Power (KW)About 11Control ModeAutomatic PLC ControlTotal Weight(KG)7200
III. Picture show
IV. Our machine list
Our company professional manufacture rubber vulcanizing press (frame type,four column type,lab press and so on), rubber mixing mill, batch off cooler, rubber extruder, rubber strip making machine and tire recycling equipment.
V. Our service
1. Test running: The above machines are all passed inspection of 3~5 hours of full load operation before leaving our factory. And we will take the video and send it to you for inspection. You can use it directly thus saving the time of test-run and expense. And we also warmly welcome to our factory to inspect and test running.
2.Warranty: 12 months after installation, if our machines have any problems, please feel free to contact me. We will solve it for you as soon as possible, and give you the best services.