China 4 Spindles 4 Rotary Axis Cylinder Flat Wood Carving Machine with Nk105 Control

4 Spindles 4 Rotary Axis Cylinder Flat Wood Carving Machine with NK105 Control
Application
Woodworking products, advertising signs, MDF board, cutting engraving Photo frame, sculpture the sofa and the head of a bed, All kinds of wood door carvings, Large furniture relief engraving, Dalle hollow out and simple copper aluminum plastic board, etc
Features
1. Welded steel T type structure as a whole with vibration Temper aging treatment ensures no deformation for long time.Cast iron Gantry, the structure is strong and stable.
2. One Z-axis with 4 spindle heads, and corresponding 4 rotary axis( maximum diameter 300mm, working length 1500mm), and removable 1500*1500mm aluminum T slot working table, can for 4 pcs flat or cylinder proecessing at same time, much improving the working efficiency.
3. imported Hiwin, Taiwan Linear square guide rail diameter 25mm for XYZ-axis with ball bearing slide block wich ensure high weight capacity, high precision, smooth and steady running. Adpot imported precision ball screws, tools feeded with more accuracy.
4. 3.5KW China cooling spindle which is with stable performance, low noise and high torque, matched with high-performance Frequency Inverter. 4 pcs on one Z-axis structure, each time can process 4 same items, improving the efficiency.
5. Japan Yaskawa servo motor and driver for XYZ-axis, high precision, fast speed and more stable, dual motor Driven Y axis with traveling speed up to more than 25000mm/min.
6. Helical gears Pinion with Racks type transmission for X and Y axis, higher running speed and efficency, saving cost. Z- axis with precision ball screw, high precision and more durable.
7.NK105 G3 4 axis offline control system with USB interface which is completely off from computer. More Humanized design with Simple and Convenient Handle type operation.With pre-calculation rule, fully excavating potentialities of motors. Enable high processing speed, synchronization of curve and straight line, more perfect curve working and Spindle startup and stop automatically.
8. Semi-auto lubrication system more convenient for maintenance.
9. Favorable compatibility with varous CAM softwares such as Type3/Artcam/Mastercam/Caxa. With intelligent over limit protection function which can stop the mechanical collision due to unproper size given to the design.
10. With the function of break-point memory, power failure resuming and automatic home/origin correction function, effectively ensure long time working precision.
Technical parameters

Effective working area1500(X)mm*1500(Y)mm*200(Z)mmMaterialsMore thickness steel pipe welded machine holder bed, cast iron gantryWorking tableAluminum T slot working table, removable typeMoving typeGantry movingGuide railLinear square guide rail ( Hiwin, Taiwan)TransmissionHelical rack &pinion for X Y -axis, Lead ball screw for Z-axisDriving modeYaskawa Japan servo motor and driver for XYZ-axisSpindle motor3.5kw air cooling, 4pcsSpindle speed0-18000rpmInverterSunfarVoltageAC 380V+ 10%, 50/60Hz, three phases or
AC 220V+ 10%, 50/60Hz, single phaseTraveling speed>25000mm/minEngraving speed>12000mm/minMachine accuracy0.01mmControl systemNK105 4 axis offlineSuitable softwareArtcam, Type3, Ucancam V9,etcCarving InstructionsG code *Uoo *mmg *plt HPGLRunning environment temperature0-45 ºCRelative humidity30%-75%Lubrication systemSemi-autoTool calibrationBy manualCertificateCE

Reference Working Videos
Cylinder engraving:
https://upgoalcnc.en.made-in-china.comFJqKwjT4Nt_p9
Flat engraving:
https://upgoalcnc.en.made-in-china.comFJqKwjT4Nt_p9




For more information, just feel free to contact us!
Jinan Upgoal Mechanical Equipment Co.,Ltd
upgoalcnc.en.made-in-china.com