China 400 Ton Progressive Press Stamping Line H Frame Power Press Stamping Line

400 Ton Progressive Press Stamping Line,
H frame Power Press Stamping Line
Manufacturing Precision Standards
1. Parameters
1) XPE 160ton~600ton Parameters
NameUnitXPE-160XPE-200XPE-250XPE-300XPE-400XPE-500XPE-600Model SHSHSHSHSHSHSHCapacityTon160200250300400500600Rated tonnage pointmm6363737373106106Strokemm180130250150280170300170300170300180300180Stroke per minutes.p.m30-5540-8520-5035-7020-4030-6020-3530-5020-3020-4018-2520-3015-2520-30Die heightmm450400500450550450550450550450580480600500Slide adjustmentmm100120120120120120120Slide areamm1600x6501850 x7502300x9002300x900A:2300x10002900x10003100x1100B:2400x1000C:2800x1000Bolster areamm1800 x7602200x9402500 x10002500x1000A:2500x10003300x12003500x1200B:2800x1000C:3200x1000Side openingmm700 x450900x600900x600900x600900x6001000x7501100x750Main motorKwxP15x418.5x422 x 430x437x445x455x4Slide adjust deviceKwxP1x42x42x42x42x43x43x4Air pressurekg/cm26666666Presses precision GB(JIS)1 classGB(JIS)1 classGB(JIS)1 classGB(JIS)1 classGB(JIS)1 classGB(JIS)1 classGB(JIS)1 class

2) 3 in 1 servo Straightener Feeder---MAC1:
ModelMAC 1-300MAC1-400Stock Width(mm)50-30050-400Stock Thickness(mm)0.2-3.00.2-3.0Max. Coil Weight(kg)30003000Max. Coil O.D.(mm)12001200Coil I.D.(mm)508508Feed Length(mm)~400~400Max. Line Speed(m/min)16-2416-24Work Roll Numberupper4 / lower3upper4 / lower3Feed Roll number11Main Motor(kw)AC2.0AC2.0Mandrel ExpansionBy manual (pneumatic) / hydraulicBy manual (pneumatic) / hydraulicReel Motor(kw)1.51.5Power (V)3Phase 220V/380V/50HZ3Phase 220V/380V/50HZOperating Air (Mpa)0.490.49

3 in 1 servo Straightener Feeder---MAC2:
ModelMAC2-400MAC2-600MAC2-800Stock Width(mm)50~40050~60050~800Stock Thickness(mm)0.3~3.20.3~3.20.3~3.2Max. Coil Weight(kg)30003000500050007000Max. Coil O.D.(mm)120012001200Coil I.D.(mm)508508508Feed Length(mm)~500~500~500Max. Line Speed(m/min)16~2416~2416~24Work Roll Numberupper6 / lower5upper6 / lower5upper6 / lower5Feed Roll number111Main Motor(kw)AC2.9AC4.4AC4.4Mandrel ExpansionhydraulichydraulichydraulicReel Motor(kw)1.51.52.22.23.7Power (V)3Phase 220V/380V/50HZOperating Air(Mpa)0.490.490.49

3 in 1 servo Straightener Feeder---MAC3:
ModelMAC3-400MAC3-600MAC3-800MAC3-1000Stock Width(mm)0.3~4.50.3~4.50.3~4.50.3~4.5Stock Thickness(mm)50~40050~60070~80070~1000Max. Coil Weight(kg)50005000500070007000Max. Coil O.D.(mm)Ф1400Ф1400Ф1400Ф1400Coil I.D.(mm)Ф508Ф508Ф508Ф508Feed Length(mm)~500~500~500~500Max. Line Speed(m/min)16~2416~2416~2416~24Work Roll Numberup4 / down3up4 / down3up4 / down3up4 / down3Feed Roll number111 Main Motor(kw)AC4.4AC4.4AC5.5AC7.5Mandrel ExpansionhydraulichydraulichydraulichydraulicReel Motor(kw)2.22.22.23.73.7Power (V)3Phase 220V/380V/50HZOperating Air(Mpa)0.490.490.490.49

2. Technical Descriptions :