China 40L 50L 60L 80L Drums Blow Moulding Machine

40l 50l 60l 80l drums blow moulding machine
Technical specification
Model
TDB-80A
Station
Single station
Max. Product Volume
(L)
80L
Dry cycle
(pc/h)
360
Screw Diameter
(mm)
100
Screw L/D ratio
(L/D)
25
Screw drive power
(KW)
45
Screw heating capacity
(KW)
8.4~10.5
No. of heating zone
(ZONE)
4
Max.Output of HDPE
(Kg/hr)
160~200
Oil pump drive power
(KW)
37
Clamping force
(KN)
440
Mold stroke (Platen distance)
(mm)
500~1200
Max. Size of Mold(W*H)
(mm)
800*1000
Capacity of the diehead
(L)
12.8
Max. Die diameter
(mm)
420
Die heat capacity
(KW)
9.2
No. of heating zone
(ZONE)
5
Blowing pressure
(Mpa)
0.8
Air volume
(M3/MIN)
1.2
Cooling water pressure
(Mpa)
0.3
Water consumption
(L/MIN)
100
Size of machine ( L*W*H)
(m)
5.42*2.45*3.9
Weight of machine
(TON)
16
Supplier of main parts
a) Hydraulic Part
Oil Pump--------------------------------------------------DENISON OR SUNNY, America
Valve-------------------------------------------------------YUKEN, Japan
Hose, Joint------------------------------------------------PARKER SIR, America
Sealer------------------------------------------------------Top DZ, Europe
b) Electrical Parts
Microcomputer Control System------------------------MITSUBISHI PLC, Japan
Touch Screen ---------------------------------------------HITECH color screen, Taiwan
Temperature Controller---------------------------------MITSUBISHI, Japan
Conductor-------------------------------------------------SCHNEIDER, France
Air Switch-------------------------------------------------SCHNEIDER, France
Motor------------------------------------------------------SIMENS BEIDE Asynchronous Motor, Japan
Power Resource------------------------------------------MEAN WELL, Taiwan
Inverter---------------------------------------------------MITSUBISHI, Japan
c) Pneumatic Parts
Solenoid Valve--------------------------------------------FESTO, Germany
Cylinder---------------------------------------------------FESTO, Germany
d) Parison wall thickness controller
Parison controller 100 point----------------------------MOOG, Japan
Workshop pcitures:

Extrusion blow molding machine installation, commissioning and training:
If the buyer needs seller to send technicians to workshop for supervising the erection and start-up, seller must support and send sufficient number of technicians and keep duration of stay in workshop. Usually it's about 3~5 days in this duration. The first day is that when our technician is at the airport to factory of buyer. And from the first day, the buyer has to pay US$50 per day. And all accommodation, visa application & air ticket will be born by the buyer.