China 433MHz 868MHz Alarm 4G 3G Alarm System APP Control Smart Home GSM WiFi Home Security Alarm System Personal  Wm2gr

433mhz 868MHZ alarm 4G 3G alarm system APP Control Smart HOME GSM WIFI Home Security Alarm System Personal


• WiFi (IEEE 802.11b standard) and GSM 3G dual-network alarm technology.
• LCD display and capacitive touch buttons, easy and convenient operation.
• Can learn 8 wireless remote controllers and 10 RFID cards.
• 10 wireless zones (80 detectors in total) and 2 wired zones.
• Each zone can be independently armed, support accessories alarm / low voltage alarm / tamper alarm and other SMS tips.
• can preset 6 groups of alarm calls, 3 groups of SMS alarms.
• Support mobile phone APP (Android and IOS) operation.
• With one-way relay alarm linkage output, 4-way wireless home appliances control.
• Timing arm / disarm, delay arm, delay alarm, alarm time can be reset.
• Remote arm, disarm, monitor, intercom and other functions.
• 30 alarm records can be queried.
• Built-in high-capacity lithium battery, can also work properly when power off.

Note:GSM SIGNAL:no flicker signal card/signal strength.
Date&time:hour-day-month
WIFI signal: indicating the host WIFI signal strength, flashing means not connected to the service cloud;
Increment indicates Smartlink mode;
Decrement indicates SoftAP mode.
Indicates only connecting to LAN.

: Away Arm. The light will be normally on if the host in the arm state
: Home arm . The light will be normally on if the host in the home arm state
: Disarm: Operation password (default 123456) + Disarm key. The light will be normally on if the host in the disarm state
: SOS key / Confirm key / # key: Press this key when encountering an emergency situation, press the 0 key and confirm key to enter the SOFTAP mode.
: Clear key / Back key: In disarm state, After inputting the phone number , long press this button to make the call, short press to view the alarm record.
: On behalf of the Up, Down, Left, Right.
4, RFID card area: in the standby mode, short swipe card to arm the system, long swipe the card to disarm. short swipe card to


[Technical Parameters]
Power supply: AC=100V~240V, DC=12V, 1.2A
Built-in battery: 7.4V, 1000mA LI battery
Standby current: <70mA
Alarming current: <450mA
GSM band: 850/900/1800/1900MHz
Wireless frequency: 433MHz ±0.5MHz
Wireless modulation: ASK
Anti-interference: 1V/m (frequency range: 20~1000 MHz)
Wireless sensors: 99pcs
Remote controls: 10pcs
RFID card: 99pcs
Working temperature: 0ºC~+40ºC
Humidity: ≤90% (no fog)