China 45cbm 60t Bulk Cement Tank Semi Truck Trailer Dry Powder

Tri Axle 60cbm 45cbm 60T 70T Bulk Cement Tank Semi truck Trailer for dry powder

We're one specialist truck refitting and semi trailer manufacturer in China, we could supply various special purpose trucks and semi trailers. Our products are always popular in China several years.
From 2005, China allow exporting completed truck and semitrailer. We established overseas department that year and exported more than 30 counties promptly. Our products got almost clients' love and admiration. We appreciate our clients' fully trust to us, and remember the responsibility every moment.
There're too much processes need to do during producing, we never dare to reduce anyone. And we never dare to reduce any material although it's expensive. All of these only for ensure the high quality and excellent performance.
Respectful , Faithful , Studious , Innovative . Our progress never could leave your supporting. Warmly welcome your coming!
Fuel tanker features are as following:
1, the tank shape: square round, oval, round.
2, tank material: carbon steel, stainless steel, steel lined, glass steel, plastic tank (polyethylene).
3, the tank is equipped with multi-channel anti-wave partitions, and can be divided into different compartments and load different oil. And can be achieved the pump into, pump out through the table, and pump into, pump out not the table, self-flow through table, and not but table.
4. The use of high-pressure gas leak detection, the tank has a high strength, the center of gravity stability, vehicle safety and stability characteristics.
5. All kinds of alcohol, sulfuric acid, hydrochloric acid, salted chemical tanker use imported stainless steel (thickness of 4mm-5mm) or plastic cans (polypropylene) (thickness of 12mm-22mm) manufacturing.
6. The fuel tank is composed of a power take-off device, a drive shaft, a gear oil pump, a tank body and a pipe network system. Pipe network system consists of oil pump, three-way four-ball valve, two-way ball valve, filter, pipe composition.
7. Fuel dispenser and reel are optional.
8. Gear pump, centrifugal pump, heavy oil pump, stainless steel pump are available and can be installed heating pipe and insulation layer.
Specification

Specifications of Tanker BodyDimension12000mm*2490mm*3990mm( Exact size depends on the final design)Tare weight kgabout 11800KGS-13000KGSTank capacity (CBM)30cbm-60cbm(Volume optional)ShapeOptional(v or w shape)CompartmentsOne or two compartmentTanker Body Material5mm or 6mm/Q235 carbon steelEnd Plate5mm or 6mm/Q235 carbon steelRim8.00-20/8.5-20/8.8-20/9.0-22.5 China BrandTire12R22.5/11R22.5/13R22.5/11.00R20/12.00R20( brand can be Optional)EngineWeichai 4105 EngineManhole Cover500mm carbon steel or aluminum alloy manholeBottom Valve3''/ 4" disc valveDischarging ValveDiameter is 3 or 4 inchDischarging Pipe4" rubber hose, 2 pcs, 6m/eachAir compressor10 m3,12m3Diesel EngineWeichai Huafeng, Tianhe 4102/4105
Main BeamWelding design or Special design, connected by bolts and nuts.
Material:Q345 carbon steel
Height 500mm,
Upper Thickness 14~18mm,
Middle Thickness 8~12mm,
Down Thickness 16~20mmAxle2 or 3 axles, BPW/FUWA brand(Optional)Landing GearJOST(D200T)or China brand 28T(two speed)Brake SystemWABCO Valve with big chamberKing PinJOST 2.00 or 3.5 inch bolt-in king pinSuspensionMechanical suspension or Air suspensionLeaf Spring90(W)mmx13(Thickness)mmx10(Layer) or 100mmx12mmx12Rear ladderDismountableLightsTurning Light, Side Marker Light, Tail LightVoltage24VReceptacle7 ways (7 wire harness)PaintingComplete Chassis sand blasting to clean rust, 1 coat of anticorrosive prime, 2 coats of final paintABSOptionalAccessoriesOne standard tool boxShipping TermsBy Bulk Cargo Carrier, RORO or 40HQ Containers

Photos:
1.. Which countries do we export to?
Asia: Philippine,Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.
Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.
South America: Brazil, Chile, Paraguay, Argentina, etc.
Africa: South Africa, Ethiopia, Libya, Ghana,Algeria,Nigeria,Congo,Mozambique ,Kenya,etc
2.What are our advantages compared with other manufacturers/factories?
1)Reliable Quality: Carefully select regular manufacturers for supporting spare parts,like engines,bridge,transmissions,and many parts designed and produced by ourselves,
always adapting the best materials.
2)Competitive Price: Concentration of mechanized production in large quantities reduce
production cost to ensure that our price is competitive.
3)Service Team: First, our sales managers are online 24 hours,ready to answer your
questions at any time. Second, professional maintenance team with senior technicians,
ready to provide support services to users and dealers. Most problems can be solved
within 24 hours.
4)Fast Delivery:Under normal circumstances,we can delivery with 10 working days in
factory after receiving pre-payment.
3.Which payment terms can we accept?
Normally we can work on T/T or L/C.
1)On T/T term, 30% payment is required in advance for production, 70% balance shall
be paid before delivery or against the copy of original B/L for old long cooperation clients.
2)On L/C term, 100% irrevocable L/C at sight without "soft clauses" can be accepted.
4. How long is the validity of our quotation?
As a reliable supplier, basically our price remains stable through one year, we only adjust
our price based on two situations:
1)The rate of USD
2)TheThe price of material
Other questions, please contact me directly!!
Peter 0086-15921244786