China 5 Ton Joystick Control for Front End Loader Xd950g for Sale

I.Features
1.The loader is equipped with the low-speed and high-torque China II Weichai engine featuring low fuel consumption, strong power and high reliability, for which a horizontally-mounted two-stage air filter of high reliability is installed.
2. The cooling system is applied with the electrically-controlled thermal energy management module and has its radiator structure and intake/exhaust duct optimized, effectively reducing the engine water temperature and the oil temperature of the hydraulic system, and enhancing the cooling efficiency of the complete loader.
3. The loader is applied with the technologically-sophisticated ADVANCE planetary transmission with two forward gears and one reverse gear, enabling easy operation, good reliability and high efficiency; the drive axle is reinforced to provide large loading capacity and high reliability.
4. The new steel cab applied offers for drivers a wide vision and a greater operating space, in which the full-coverage interioris configured to give a good sealing performance, and the optional A/C offers a good comfort.
5. The loader is equipped with the load-sensing mechanically-controlled hydraulic steering system, allowing easy control, and stable and reliableperformance. The hydraulic pipelines are of dual-sealing structure, further enhancing the tightness of hydraulic system.
6.The loader is applied with the reinforced rear/front frames which have gone through 200,000 cycles of fatigue intensifying tests, and the load of complete loader is reasonably distributed, both of which contribute to a high loading capacity and a good stability.
7.The optimal design is conducted for the implement, which ensures large breakout force and high full-load coefficient; the main cutting board of the bucket is of the trapezoidal wear-resisting steel structure, and the bottom wear-resisting plate is of thickened structure, which ensures small shoveling resistance and good wear-resisting property.
8. XD950G, a long-wheelbase loader for loading bulk materials and hard materials, features large breakout force and tipping load enjoyed by long-wheelbase loader as well as the flexibility and small turning angle enjoyed by short-wheelbase loader, and is widely applied in areas like sand plants, ports, construction sites, mines etc.
II.Specifications
Bucket capacity
2.8m3
rated loading
5000KG
lifting time (full loading)
≤5.7s
fall time (empty)
≤3.5s
discharging time (empty)
≤1.0s
Speed Forward:

I gear (forward)
0-13.5km/h
II gear(forward)
0-38km/h
reverse
0-17km./h
Max.breakout
≥155kN
Max.traction
≥150kN
Max.climbing
29°
Min.turning radius
6201mm
Max Steering
35°
Tire pressure

front tyre pressure
0.39±0.01Mpa
back tyre pressure
0.39±0.01Mpa
Main Specification

Overall Length
7929mm
bucket width(outside of wheel )
tidan
bucket width
3024 mm
bucket height
3423 mm
wheel tread
2250 mm
wheel base
2920 mm
Min ground clearance
534 mm
Max.discharge height
3400 mm
Sumping angle
1083 mm
discharge angle
≥45°
working weight
16700kg
engine
weichai WD10G220E
gearbox
hangchi ZL50
driving axle
feicheng
cabin
sdlg