China 500W 1000W 2000W Fiber Metal Laser Cutting Machine

1000W 1500W 2000W fiber metal laser cutting machine

Description

Advanced Control Function:

1. Height sensor automatic calibration function:
Manual height sensor calibration is inconvenient and cumbersome, and requires high level operators. With the PA8000 laser cutting system using automatic calibration method, no cumbersome operations are needed, and the CNC laser cutter can rapidly calibrate the height sensor automatically.

2. Change to pulsing at corner cutting control function:
When the sharp corner of a thin to medium carbon steel sheet is cut, melting loss will occur easily, so the quality of the cutting section of the sharp corner can't be guaranteed. With the PA8000 laser cutting system using the change to pulsing at corner cutting control function, the laser power, pulse frequency and pulse duty factor are changed for sharp corner cutting, and the CNC laser cutter restores the previous control mode after passing the sharp corner, thus guarantees the section quality of outline cutting of sharp corners and the efficiency of cutting.

The fiber laser is a new development of a new type of solid state lasers, it has a large cooling area, good beam quality, compact.

Fiber lasers due to the optical path can be coiled, the optical path space is smaller, in the case of using single core junction semiconductor pump lasers do the pump source, the pump laser may be dispersed installation, and has good heat dissipation characteristics, in the mounting density is not high case, the can is cooled by air, and in the case of higher mounting density, only a small amount through the water to meet the cooling requirements, therefore, the volume of the all fiber laser is smaller than the same output power of the gas and the solid-state laser system, the weight lighter.

Parameters

Model GS-LFDS3015(Dual Drive) Output power of laser source1000-2000WCutting area (L*W) 3000mm x 1500mmZ axle stroke150 mmMax. cutting speed40m/minMax. positioning speed80m/minPlatform size/Max height of feeding material4250x2500mm/more than 120mmCoolingwater coolingLaser wavelength1070nmCutting gap0.1-0.3mm Positioning accuracy of X, Y and Z axles±0.03 mmRepeated positioning accuracy of X, Y and Z axles±0.02 mmThickness of cutting material
(according to material)0.2-12mmDrive modelimported servo motorVoltage380V,50/60HzTemperature5ºC-45ºCContinuous working time24 HoursWok platform max bearing600KgsComplete System Coverage4500x2700mmTotal protection level of power supplyIP54

Features of Han's GS Laser Cutter
Low running and maintenance cost
Lower running cost compared with traditional CO2 laser cutting machine, the power consumption is 20%-30% of CO2 laser cutting machine.

Environmental protection, low power consumption which is just 20%-30% compared with traditional CO2 laser cutting machine.

The maintenance cost of fiber laser cutting machine is much lower since it's without reflective lenses.

Rational Structure and Easy Operation
Professional CNC laser control system with computer control which is more simple and convenient for operation.

Satisfied with flexible processing with small size and intense structure design.

Convenient operation with fiber transmission, laser route adjustment is unnecessary.

Gantry design with double drive structure, high damping machine tool with better rigidity which can stand higher speed and acceleration speed.

Adopt with alternative drive system and transmission system which are imported from abroad to ensure the high speed, high precision and high reliability.

The rack and guide is comprehensively sealed to prevent the friction without oil and dust pollution in order to make the drive system much longer service time and ensure the movement precision of the machine tool.

Stable performance with high cutting speed, precision , efficiency and protection

High speed: Capable to cut sorts of metal board with air blowed; the cutting speed can reach dozens of meters per min.

High precision: Adopt high precision drive structure with imported service motor, ±0.03mm positioning precision

High efficiency: Software with strong function, capable to design sorts of shapes, letters for cutting with easy and convenient operation.

High protection: the laser source and machine tool is comprehensively sealed to ensure the security of the operator, the whole working process can be viewed and inspected through the glass.
about Han's GS laser:
Han's Goldensky is the High power laser expert in China.
1.It is located in Wuhan"Optics Valley" Core enterprise
2.Founded in 1998;Registered capital is $13 million, Total assets is $24.6 million
3.Han's Goldensky Science and technology park, the first phase of construction is 20000 square meters
4.Three products are included in The National Torch Plans Key projects list

Our service:

Technical Train

1. Train Explanations

Train for operation, mechanical, CNC maintenance, electric, laser and laser technique

The technical train is divided into two parts with total training time no less than 5 days to ensure customer can operate with machine independently.

2. Train Plan

Preliminary train: Train for technicians provided by us before customer acceptance. Detailed arrangement is negotiable by both parties.

Secondary train: Train provided by us on live during the installation and testing phase of equipment with theoretical instruction, operation demonstration, field instruction