China 500W DC Plasma Sputtering Power Supply with Optional Magnetron Sputtering Head

The DC-500-LD power supply is intended primarily for DC magnetron sputtering source. It is compact and over 90% efficient. And have low stored energy at the outlet. Special integrated circuitry enables arc suppression for arc-sensitive applications and arc control for sustained arc applications. Front panel controls switch regulation between constant power, current, or voltage while permitting the power to be ramped to the set point.
Specification of the 500W DC plasma sputtering power supply:

InputAC220V +/-10% or AC120V+/-10% selectableOutputMax. Output Power: 500WMax. Output Voltage: DC600VVoltage Resolution: DC 1.0VMax. Output current: DC 0.8ACurrent resolution: 1mAControl Accuracy: +1%DimensionCase: W440mm X H85mm X D403mmFront Face: W440mm X H85mmOptional Accessories
Click here to orderYou may order 2" High Vacuum Magnetron Sputter Source For DIY RF & DC Sputtering Coater together with DC power supply for immediate useHigh Vacuum Quick Disconnect is included when you order 500W DC Sputtering power supply together with the 2" sputtering source.High Vacuum Quick Disconnect with 0.75" ID (compatible with HVMSS-SPC-2). Use this component to install the HVMSS-SPC-2 sputtering tool onto the baseplate (up to 1" thick) of a vacuum chamber with 1" diameter through-hole WarrantyOne year limited with lifetime support