Dual Switching Power Supply 50W
Features:
1. AC input voltage range selected by switch
2. Small volume, low weight, high efficiency
3. Protections: Short circuit/over load
4. LED indicator for power on
5.100% full load burn-in test
6.2 Year warranty
D-50WModelD-50AD-50BD-50COutputDC voltageCH1: 5VCH2: 12VCH1: 5VCH2: 24VCH1: 12VCH2: 24VVoltage tolerance± 2%+4%~-8%± 3%+6%~-8%± 3%+6%~-8%Rated current6A2A4A1.5A2A1.2ACurrent range0.8~6A0.3~2A0.8~4A0.2~1.5A0.5~2A0.2~1.2ARated power54W56W52.8W Ripple & noise (max. )80mvp-p100mvp-p80mvp-p120mvp-p100mvp-p120mvp-pDC voltage ADJ. rangeCH1: -9%~+10%InputVoltage range90~132VAC/180~264VAC(selected by switch), 255~373VDCFrequency47~63HzAC current (Typ. )1.3A/115VAC, 0.65A/230VACEfficiency (Typ. )73%75%77%Inrush currentCold start current 18A/115VAC, 36A/230VACLeakage current< 2mA/240VACProtectionOverloadabove 110%~150 rated output powerprotection type: hiccup mode, auto-recovers after fault condition is removedEnvironmentWorking temp, humidity-10º C~+60º C, 20%~90%RHStorage temp. humidity-20º C~+85º C, 10%~95%RH non-condensingWithstand vibration10~500Hz, 2G 10min/1cycle, period for 60 minutes, each axesSafetyWithstand voltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVACIsolated resistanceI/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDCFit standardSafety standardFit UL1012EMC standardmeet EN55022, CLASS AOthersDimension159*97*38mm (L*W*H)Weight/packing0.52kg/45pcs/24kg/0.041m³ /1.45CUFTNote1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25º C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.