INDUCTION FURNACE FOR MOLD CASTING:
The emphasis of such induction furnace is mainly put on the volume more than melting rate, the rate is designed due to mold casting time, the power density is usually low. The scrap should be clean and pure, normally most from industry recovery. The furnace structure usually includes holding cover, and ring dust mask.
INDUCTION FURNACE FOR ConTINUOUS CASTING:
This type of induction furnace pays more attention to melting speed and high power density. The raw materials can be diverse. In every melting cycle, feeding of scrap is frequent, also the smoke and dust are much, holding cover and ring dust mask are no longer suitable for it.
Rated
capacity
( t )
Rated
power
( KW )
Rated
frequency
( HZ )
Transformer configuration
pulses
Coil
voltage
( V )
(1600ºC)
Melting
rate
( t/h )
Energy
consumption
( kWh/t )
Capacity
( KVA )
Secondary voltage
( V )3220050025003φ690V624002.86505350050040003φ1000V632004.563010630050070006φ1000V12320096001590002502x50002x6φ1000V2432001256520110002502x63002x6φ1000V2432001556030140001502x80002x6φ1000V2432002055040180001502x100002x6φ1000V2432002554050200001502x110002x6φ1000V2432003053060220001002x120002x6φ1000V2440003552070240001002x130002x6φ1000V24400040510
Transportion & Delivery