China 55kws 75HP Wire Saw Machine for Granite Marble Sandstone Onyx Travertine Stone Quarrying

LQ series wire saw machines are with PLC control and double vector invertors for both the main motor and travel motor, which allows to variable speed setting from 0-40M/S. The lateral extension and 360° rotation of driving wheel-holder head are motorized, easy to position the saw, and allows to execution of two parallel cuts. All the movements of the saw are motorized. The automatic step-less tensioning system enables to keep the diamond wire constantly working under proper programmed tension. The unloading stop system can stop the saw and alarm to inform the operator in case of unexpected wire break, which enables to temporary no supervision work and increases the work efficiency in quarry.
1.) Variable wire speed setting from 0-40M/S
2.) Motorized rotation of driving wheel holder from 0- 360degree with limit control for over movement
3.) Motorized lateral extension of flywheel shaft position each side maximum 350-400mm with limit control for over extension
4.) Maximum travel speed on rail without loading 1.75M/Min to save time
5.) Safety alarm and stop system for unexpected wire break or other faults like over voltage, over currency, over heat on main motor etc
6.) Distant control with very simple panel to operate the saw with better safety easier understanding to the operator
7.) Separate automatic reset selection switch to control the rotation and lateral extension movement; which can be taken off when it is no need
8.) Schneider electronics with better reliability and convenient local source 9.) 5 seconds main motor start alarm and flash light to remind people around to leave away for better safety
10.) Solid turbine and worm with perfect covering and protection against dust and water to move in
11.) Direct Gear driving for stable and fast travel movement on rail
12.) Big size and heavy steel frame with better space for maintenance and good stability.
13.) Strong and fine rail with good duration and stability assures the saw will move smoothly during cutting.

ModelMain MotorSpeed SettingDiameter of Drive WheelApplicationRemarkLQ-WSM-37KWS37KWS0-40M/S800MMSuitable for all natural stone quarrying and block trimming, as well as controlled demolitionStandard power supply 3phases, 380volts,50Herz

Modification or transformer will be need for other power standardLQ-WSM-45KWS45KWS0-40M/S800MMLQ-WSM-55KWS55KWS0-40M/S800MMLQ-WSM-75KWS75KWS0-40M/S1000MM

If you are interested and would like to know more about us, welcome to visit us at http://www.keenwiresaw.com