China 5754 H112 O F Aluminum Alloy Forgings for Automotive Automobile Vehicle

5754 H112 O F Aluminum Alloy Forgings for Automotive Automobile Vehicle
5754 alloy (EN AW 5754) is a registered by the United States in 1970 - aluminum magnesium alloy, aluminum alloy and magnesium is configured with fine high purity, in order to maintain its good surface processing performance, the strict control of the content of impurities, now 5754 alloy has become the largest deformation of aluminum there are 11 members of the family of alloys (5154, 5154A, 5154B, 5254, 5354, 5454, 5554, 5654, 5654A, 5754, 5854, 5954), each alloy has its specific application. The chemical composition of 5754 alloy is 0.40 Si, 0.40Fe, 0.10 Cu, 0.50 Mn, 2.6~3.6 Mg, 0.30 Cr, 0.20 Zn, 0.15 Ti, 0.10~0.3 (Mn+Cr), the other impurities are 0.05, total 0.15, and the rest are Ti. The alloy has good anodizing and weldability. In automobile industry, it is mainly used to forge interior and exterior ornaments in addition to rolling sheet.
Specification of 5754 aluminum alloy forgings
Alloy: 5754
Available Temper: H112,O,F
Maximum single unit weight: 800kg
Maximum diameter with quenching:2000mm
Maximum diameter without quenching: 2800mm
The application of 6060/6063 alloy (EN AW 6060/6063, AlMgSi/AlMg0.7Si) in the state of T5/T6. 6060 alloy composition: 0.30~0.60Si, 0.10~0.30Fe, 0.10Cu, 0.35~0.60Mg, 0.05Cr, 0.15Zn, 0.10 Ti, other impurities 0.05, 0.15, the rest Al, developed by the European Aeronautics and Astronautics Association, and registered in Alcoa in 1972. 6063 alloy components: 0.20~0.6 Si, 0.10~0.35Fe 0.10, Cu, 0.10Mn, 0.45~0.9Mg, 0.10Cr, 0.10Zn, Ti 0.10 and other impurities each 0.05, a total of 0.15, the rest is Al; 1945 to finalize the design, by the Alcoa Corp research and development, is currently the largest output single deformation Aluminum Alloy, mainly used for extrusion of aluminum construction, the building is 92% aluminum extrusion the above alloy production.
The two alloys are characterized by excellent formability, solderability, corrosion resistance, suitable for electrochemical polishing and anodizing, and used for making highly decorative forgings.
Specification of 6060/6063 aluminum alloy forgings
Alloy: 6060, 6063
Available Temper: H112,O,F,T3,T4,T5,T6,T7,T8,T9,T651,T851,T451,T351
Maximum single unit weight: 800kg
Maximum diameter with quenching:2000mm
Maximum diameter without quenching: 2800mm