China 5GHz 11AC Wireless CPE Max 8km Transmission for Point to Multi Point

Features

IEEE 802.11ac compliant and backward compatible with 802.11an
Atheros 533MHz Networking Processor AR9344
5G Up to 27dBm output aggregate power

Data rates of up to 867Mbps in 802.11ac 80 MHz channels

Enhanced sensitivity performance

Built-in 17dBi@5GHz dual-polarization antenna

Antenna Alignment Site Survey - LEDs/Buzzer

Distance Adjustment for long range transmission

Integrated Power-over-Ethernet

Weatherproof casing

2 x RP-SMA Male Connector for External Antenna (optional)1


Applications


802.11ac/an AP

Point to Point / Point to MultiPoint

CPE
Firmware Features

1.Multiple SSID
Supports up to 16 virtual access points (VAP) per radio, with unique BSSID. Each VAP can configure their own security
2.Long Range Support
Suitable for long range wireless deployment with Proprietary Long Distance Algorithm for ACK and CTS timeout adjustment support.
Provides recommended values for the parameters as well as allow for manual fine-tuning for optimal performance.
4.Selectable Spectrum Bandwidth Support
Options to select operation over 20MHz and 40MHz spectrum bandwidth

Firmware Information
Operating Modes? Access Points
? Access Points WDS
? Station
? Station WDS
WAN Type? Static IP
? Dynamic IP
? PPPoE
? DHCP
Device Management? HTTP / HTTPs Web Server
? SNMP V3
? Telnet / Secure Shell (SSH)Data Capture & Notification? System Log
? Kernel Log

Advanced Features? Built-in DHCP server
? Transmission Power Control (One dB per step)
? Closed System (Suppress SSID)
? Transmission Rate Control
? Spanning Tree ProtocolOther Prominent FeaturesDescriptionLong Range Parameter SettingsSuitable for Long Range wireless deployment with high receiver sensitivityCPE Point-to-Point (PtP)Ideal as CPE device connecting PtP with a central APIEEE 802.11h (DFS & TPC)Enables worldwide operation through support for standards-based
Dynamic Frequency Selection (DFS) and Transmission Power Control (TPC)SNMPFor multiple SSID, firmware upgrades. Easy for customers to integrate with SNMP-based controllerSignal Strength LEDs Indicators4 Step Progressive Bars. Each bar represents a progressive increase in Signal strength, with 4 bars representing maximum signal strength (100%)VLAN ManagementCan manage the AP through VLAN IDVLAN Ethernet TrunkMap VLAN IDs to multiple SSIDChillispot (Hotspot)Can use with/without Radius ServerOpenWRT-derivedEasy to add in features from OpenWRTCustomization (with SDK)Customers can add in packages of OpenWRT, and also modify webpages on their own, with SDK upon approval

17dBi@5GHz dual-polarization antenna

Gain17dBiRadiationDirectionalFrequency Range5.1-5.9 GHzPolarizationDual - PolarizationAzimuth -3dB BeamwidthHorizontal(Port 1): 30 degrees
Vertical(Port 2): 33degreesElevation -3dB BeamwidthHorizontal(Port 1): 17 degrees
Vertical(Port 2): 17degreesIsolation-40dB (Max)Front-to-Back Ratio-30dB (Max)VSWRHorizontal (Port 1) : < 1: 1.87; Vertical (Port 2): < 1: 1.55Cross Polarisation Isolation-28dB (Max)SideLobe<-12dB

Ordering Information

CodesIntegrated AntennaVersionPSE moduleRadio OutputMMJ344HV 6A6AFCWUBRV527EB5N17USNo5G 30dBmMMJ344HV 6A6AFCWEBRV527EB5N17EUNo5G 30dBmMMJ344HV 6A6GFCWUBR16128B2N11USNo2.4G 26dBmMMJ344HV 6A6GFCWEBR16128B2N11EUNo2.4G 26dBmP-PSE-M-6A03-SPLPoE pass-Thru module