Full Function Adjustable Waterproof Power Supply 60W
1. Universal AC input
2. Built-in power factor correction
3. Protections: Short circuit/over load/over voltage/over temp
4. Cooling by free air convection
5. OCP point adjustable through output cable or internal potentiometer
6. IP67/65 design for indoor or outdoor installations
7. Suitble for LED lighting and moving sign applications
8.3Year warranty
HLG-60WModelHLG-60-12HLG-60-15HLG-60-24HLG-60-36HLG-60-48OUTPUTDC voltage12V15V24V36V48VConstant current region8.4~12V9~15V14.4~24V21.6~36V28.8~48VRated current5A4A2.5A1.7A1.3ARated power60W60W60W61.2W62.4WRipple& noise150mvp-p150mvp-p150mvp-p33~40V44~53VVoltage ADJ range11~13V13.5~17V22~27V200mvp-p240mvp-pCurrent ADJ rangeCan be adjusted by internal potentiometer or through output cable3~5A2.4~4A1.5~2.5A1~1.7A0.78~1.3AINPUTVoltage range90~264VAC, 47~63Hz, 127~370VDCAC current0.8A/115VAC, 0.4A/230VACPower factorPF> 0.95/230VAC, PF> 0.98/115VAC Start overload protectionEfficiency84%87%89%89%90%Inrush currentcold start 20A/115VAC, 40A/230VACLeakage current< 0.5mA/240VACPROTECTIONOver current95%~110%protection type: Constant current limiting, auto-recovery after fault condition is removedShort circuitHiccup mode, recovers automaticallyafter fault condition is removeOver voltage13.8~16V18~24V28~35V41~49V54~63Vprotection type: Shut down o/p voltage re-power on to recoverOver temperature95º C± 10º C (RTH2)protection type: Shut down o/p voltage re-power on to recoverENVIRONMENTWorking temp, humidity-20º C~+60º C, 20%~90%RHStorage temp. humidity-40º C~+85º C, 10%~95%RH non-condensingWithstand vibration10~500Hz, 2G 10min/1cycle, period for 60 minutes, each axesSAFETYWithstand voltageI/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVACIsolated resistanceI/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDCFITSTANDARDSafety standardFit UL1310 CLASS2, TUV EN61347-1, EN61347-2-13, IP65approvedEMC standardFit EN55015, EN61000-3-2 Class C(> 60%load): EN61000-3-3OTHERSDimension174*63*39mm (L*W*H)Weight/packing0.75kg/20pcs/16kg/0.026m³ /0.91CUFTNOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25º C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation.