China 65 Qv-Sp Sump Slurry Pumps with Strainer

65QV-SPR Sump Slurry Pumps with Strainer

Naipu NP-SP Pumps are vertical, centrifugal slurry pumps submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet end parts of type NP-SP sump pump are made of abrasion-resistant metal. All parts of type NP-SP(R) pump immersed in liquid are lined with rubber outer liner. They are suited to transport non-edge angle abrasive slurry.
Typical Applications-
Sump drainage washdown.
Floor drainage
Mill Sumps
Carbon transfer
Monitoring
Magnetite mixing

Product Overview:
Our Vertical Sump Pump
40PV-SP(R) 65QV-SP(R) 100RV-SP(R) 150SV-SP(R) 200SV-SP(R) 250TV-SP

The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water.

Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.

Advantages:

The sump pump body is bolted to the support plate. The bearing Assembly is designed on the top of the support plate. The physical layout of the submersible sump pump simplifies maintenance operations

Vertical cantilever design eliminates the need of shaft seal or sealing water, the centrifugal sump pump can function property even when there is insufficient slurry getting to the suction side.

The open impeller design has vanes on both sides to balance the centrifugal forces to ensure stable operation. Wide flow passage allows large particle and high viscosity slurries to get through.

The double screen filters are set at the suction side to stop big particles out of the slurry. Protect pump life time.

Installation Types:

DC: The motor mounting base is set above the bearing assembly, connect with couplings. It is easy to install and repair.

BD: A V-belt is used to connect the motor shaft to pump shaft. The motor frame is above the bearing assembly. In this way, it is easy to replace the grooved wheels. The purpose of swapping grooved wheels is to change the rotary speed of the pump to meet different pump working conditions or conform to the worn-down sump pump.

Pump Performance Parameters:
Workshop Show:
NAIPU PUMP is a whole processing company, Start from Modeling Workshop,Casting Workshop,Heat treatment Workshop,Machining Workshop ,Assembly Workshop and Pump Testing Workshop are all by us. So we are modernization and integrated company to satisfy the requirement of the changing needs of market.
Three-type construction of pump inlet
1.Standard type with strainer
2.Suction Pipe with strainer
3.Agitator Type
Vertical Spindle Pump with Agitator
Application on Site
Contact US
Shijiazhuang Naipu Pump Co.,Ltd
Add: No.368 Xinshi North Road,Shijiazhuang,Hebei,China