China 7200L 130HP Hang Barrel Bucket Garbage Compactor Truck

This hang barrel bucket garbage truck is a garbage truck integrating collection, compression, transportation and self-discharging. The loading capacity is more than 2.5 times the volume of the uncompressed garbage truck. Through the power provided by the hydraulic system, the vehicle realizes the filling, compression and unloading of the garbage, which reduces the work intensity of the operator and improves the work efficiency and safety factor.
Specifications of vehicle:

Model:MD5075ZZZType:4x2, hang barrel bucket, compression typeDriving type:LHDOverall dimension (mm):5805*2000*2670Tank capacity ( m³):>7Wheel base (mm):3360Tread FR/RR (mm):1440 (front), 1425 (rear)Rated load of axle FR/ RR(kg):2630/4710Ground clearance (mm):190Overhang F/R(mm):1110/1335Departure and approach angle(°):20.5/19Curb vehicle weight (kg):4350Gross vehicle weight (kg):7340Payload (kg):2860Fuel Tank Capacity (L):75Tire size:7.00R16

Technical parameter of chassis

I:Details

The second-class chassis selected for this model is a mature light truck model of JAC Company.With its green environmental protection, strong power, solidity and durability, safety and comfort, elegant appearance and wide applications, it has won the respect and trust of consumers. The chassis quotes the same model technology of Japan's Isuzu, and condenses three core technologies of the world's leading electronic control technology, optimal combustion control technology and exhaust aftertreatment technology.

Design of the whole vehicle is compact and coordinated, and the appearance is fashionable and atmospheric. Power, maneuverability, economy and ride comfort of this vehicle exceed those of similar domestic models.

Cab:Single , tilting cabinGear box:LC6T450M1 ,Manual, 6 forward and 1 reverseGear ratio.6.314,3.913,2.262,1.393,1.000,0.788,R 5.874Steering:Power steering,recirculating ball steering gearSuspension: Leaf springService brake:dual circuit ; air brake with brake drumParking brake:Central drum typeAuxiliary brake:ABS+exhaust brake

II:Power system

The vehicle is equipped with high-performance WP3Q130E50 engine. based on the most advanced engine technology in Asia, it is further optimized to achieve the Euro V emission standard. The power reaches 91KW and the fuel consumption is only 17.4 L/KM, it is the lowest among the same models in the Chinese market.

Model:WP3Q130E50Type:Diesel, 4-cylinder, in line, water cooled, naturally aspirated, direct injectionDisplacement (cc):2970Type Of Fuel:DieselMax. Power (kw/rmp):96/3000Max. Torque (N.m/rmp):350/1400~1800Emission:Euro V

Upper part of vehicle

I: Effective volume of the carriage is above 6.5 CBM, and high-quality alloy steel plates are adopted for carriage production. The bottom of the carriage is of channel steel structure and its thickness reaches 5 mm. And thickness of bottom floor & side wall is respectively 4mm & 3mm. The side wall of carriage is flat without reinforcing bars.

II:Cathodic Electrophoresis

The high quality electrophoresis technology can make the salt spray process time up to 1000 hours, and the efficiency is more than 5 times that of general spraying technology, which greatly improves the anti-corrosion and rust ability of the compartment.All steel plates of tanks will be treated with pickling phosphate,which makes them corrosion-resistant&anti-rust.Also tanks shall be treated with cathode electrophoresis process too.

And this process could make sure the carriage can work at least 6 years without going rust.

III:Compound lifting mechanism Top mounted hydraulic cylinder is specially designed to ensure the stability and capacity load-bearing of lifting process.And 240type dust bins can work well with the mechanism.
IV:The compartment is equipped with a pushing shovel compression unit which can push the garbage collected inside the carriage to effectively improve the use of the carriage.
V:Double two-stage cylinders are adopted for the tilting of the carriage to ensure the lifting height of the compartment and the stationarity during the lifting process.The hydraulic control system is convenient and simple.
VI:Specially designed interlocking system is applied to garbage lifting and pushing plates to avoid garbage scattering and parts damage due to wrong operation.{only when the push plate is against the stroke valve,can the lifting mechanism work.At this time,the push plate returns to its original position(the front end of carriage)}.
VII:Rear door of container is locked by 2 hydraulic cylinder lock hooks. Together with quality imported sealing strips adopted, no sewage or garbage & leakage will occur.
VIII:Large volume stainless steel drain tank is installed at the bottom of the carriage, it is supposed is to collect sewage during compression transportation. And then sewage will be discharged by drain pipe.
IX: The oil temperature scale is added to the hydraulic oil tank to keep track of the oil volume in the hydraulic system.
X:All hydraulic valves, oil cylinders, oil pipes, valve blocks, oil pumps, PTO are from domestic well-known brands. And quality claims caused by non-human factors within warranty period, assembly parts will be sent for replacement without charge.
XI:The bucket lifting device can work with 120# & 240# dustbins. And detailed size of dustbins are of 102 x 59.05 X 74 mm & 90 x 60 X 75 mm.