China 800Mbps Powerline Telecommunication Product DIN Rail Industrial PLC Ethernet Bridge

DIN rail industrial PLC Ethernet bridge is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., itsupports the G.hn protocol and the actual bandwidth up to 400Mbps. The product has been widely used in many aspects just as railway, mines, industrialtelecommunication
and metro etc..

Support G.hn.
Industrial DIN rail style installation
Actual bandwidth up to 400Mbps
The maximum transfer distance up to 1000 meters
Self-adapt the rate
Compatible with all G.hn devices
One Domain Master can manage 15pcs End Point.
There can be 16 groups(16 different Domain Master) of PLC
telecommunication devices in the same power line circuit

Support Remote Firmware update(TR069)
802.3D Ethernet Bridge.
802.1Q VLAN.
Quality of Service(QoS) .
IGMO(IPv4)Snooping &MLD(IPv6)Snooping
Support local web management

Working temperature: -40ºC-80ºC.
Operating humidity: 10%-85% no condense
Storage humidity:5%-90% no condense

ITU-T G.9960
IEC 60529
IEC 50022
IEC 60068-2-6
MIL-STD-810G

Packet loss:≤0.1%(100M,load70%)
Support 7*24 hours all weather operation
hardware watch dog function
PING≤2MS
The quantity of the group ≤16pcs

The testing voltage which the device should be beared: ±6kV direct Discharge,
±8kV
air discharge. Discharge number in Each sensitive testing point:Plus-n-Minus 10
times each, Every time the discharge interval is 1 s, according to B/T
17626.2-2006.

The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008

Model

WD-C1000M-DIN

Interface

1*LAN 10/100/1000base-TX self adaption RJ45,1*DC power interface MDI/MDX support

LED display light

Ethernet, PLC link ,power

Transfer band

25,50 and 100MHz and MIMO (based on G.9963)

Protocol(PHY)

IEEE802.3,IEEE802.3x, IEEE802.3uG.Hn

Security

128-AES

Transfer rate(PHY)

800Mbps

Modulation

OFDM

Effective transfer rate

TCP/IP 400Mbps

Manageability

Remote Firmware update,support TR-069(optional)

802.1D Ethernet Bridge

802.1Q VLAN

Quality of Service(QoS)

IGMO(IPv4)Snooping&MLD(IPv6)Snooping

Working voltage

12V-30V

Operating temperature

-40ºC-80ºC

Size

67*160*123 (mm)(LxWxH)

Weight

0.30kg

Operating environment

Operating humidity:10%-85% (no condense)

Storage humidity: 5%-90%(no condense)

Certification

FCC,CE class B,WEEE,RoHS

The testing voltage which the device should be beared: ±2kV, the interval of
continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of
discharge tube type)

Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum
amplitude
7mm), interface with no loose, device with no Sealing off and drop in the test.

COAX75ohm
100meter about 500Mbps
200meter about 400Mbps
300meter about 300Mbps
400meter about 150Mbps
500meter about 90Mbps
600meter about 50Mbps
800meter about 40Mbps
Certificate: